South East Scoobies  

Go Back   South East Scoobies > The Garage > General Mechanics
Reload this Page Td05 18g
FAQ Calendar

Reply
 
Thread Tools
  #1  
Old 16-03-2014, 08:20 PM
CutmasterT CutmasterT is offline
Regular User
  
Join Date: Mar 2014
Location: Essex
Posts: 8
Default Td05 18g
Hi all

Just after some advice on turbo + intercooler upgrade I'm thinking about getting.

It seems a bit of a minefield with turbos and I guess it all depends on what you're after. My main goal is to achieve around 390 (maybe more) with a fast spool - if possible.

Currently I have a vf23 which is great but I have been told that 340 is probably the limits of the turbo?
I will be getting a FMIC soon from Japspeed, as they seem relatively affordable.

My question is: would a TD05 18G be a good turbo for this figure? They seem relatively cheap, and I am setting aside approx. £600 for a turbo. I know billet turbos are 'the ones' to get, but I don't think I can afford one just yet.

Any ideas or recommendations is greatly appreciated. My knowledge on turbos is limited and so thought best to ask here first!
Reply With Quote
  #2  
Old 16-03-2014, 08:24 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default
Normally produce around 380bhp non billet
Reply With Quote
  #3  
Old 16-03-2014, 09:27 PM
scotty's Avatar
scotty scotty is offline
Platinum Member
  
Join Date: Aug 2012
Location: In ma bed
Posts: 5,807
Default
You could always give John at phone at BRD in Edinburgh £850 for TD05 20g billet new .
Reply With Quote
  #4  
Old 16-03-2014, 11:54 PM
drakesnow drakesnow is offline
Bronze Member
  
Join Date: Jul 2012
Location: South east
Posts: 493
Default
Correct on rough limit of vf23. I might go 20g of some varient to hit your goals comfortably. I currently run an st420 which is a 20g variant essentially. John @ BRD would be a good first stop though.
Reply With Quote
  #5  
Old 17-03-2014, 08:33 PM
scoobycoops's Avatar
scoobycoops scoobycoops is offline
Silver Member
  
Join Date: May 2009
Location: Brighton
Posts: 696
Default
20g not very fast spool...
__________________
Regards,
Coops.
Reply With Quote
  #6  
Old 17-03-2014, 08:40 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default
Ask Bytes what he thinks of BRD before you buy one !
Reply With Quote
  #7  
Old 17-03-2014, 09:27 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
If 390 is your goal then a 20g really (Andy forest or Harvey smith one if you can find it) or perhaps an MD321T with the boost set around 1.3 bar
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #8  
Old 17-03-2014, 09:39 PM
scotty's Avatar
scotty scotty is offline
Platinum Member
  
Join Date: Aug 2012
Location: In ma bed
Posts: 5,807
Default
Thought I would mention that Andy Forrest sends turbos to john @ BRD to get the work done .
Reply With Quote
  #9  
Old 17-03-2014, 10:22 PM
Domo2106's Avatar
Domo2106 Domo2106 is offline
Silver Member
  
Join Date: Jan 2014
Location: Brighton
Posts: 597
Default
Quote:
Originally Posted by scotty View Post
Thought I would mention that Andy Forrest sends turbos to john @ BRD to get the work done .
Hes in the process of rebuilding my vf35 now, he's very helpful and very reasonably priced I got a rebuild and new exhaust housing for £250
Reply With Quote
  #10  
Old 17-03-2014, 10:38 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,485
Default
http://www.ebay.co.uk/itm/Subaru-Imp...item3a8d1682b8
Reply With Quote
  #11  
Old 17-03-2014, 10:50 PM
ScoobyStu's Avatar
ScoobyStu ScoobyStu is offline
Gold Member
  
Join Date: Jun 2012
Location: Worthing
Posts: 1,527
Default
Forgive me if I'm wrong but for fast spool wouldn't he be better off fitting a newage top mount and getting something like an SC38?
__________________
Smiles Per Gallon >>>>>>>> Miles Per Gallon
Reply With Quote
  #12  
Old 18-03-2014, 03:03 PM
braveheart sti braveheart sti is offline
New Member
  
Join Date: Mar 2014
Location: scotland
Posts: 3
Default
Quote:
Originally Posted by C. J. View Post
Ask Bytes what he thinks of BRD before you buy one !
I would also luke to know what he thinks ?

As I have only ever had 2 returns in 3 years which were either replaced etc or repaired i struggle to see the issue....

Feel free to crticise on 1 persons opinion your more than entitled to there is after all somethong called free speech

All my turbos are warrantied for a year and after that free repairs labour wise so again......
Reply With Quote
  #13  
Old 18-03-2014, 04:40 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,485
Default
Quote:
Originally Posted by braveheart sti View Post
I would also luke to know what he thinks ?

As I have only ever had 2 returns in 3 years which were either replaced etc or repaired i struggle to see the issue....

Feel free to crticise on 1 persons opinion your more than entitled to there is after all somethong called free speech

All my turbos are warrantied for a year and after that free repairs labour wise so again......
Good to see you on here Mr Baveheart. Sounds like a good service you provide.
Reply With Quote
  #14  
Old 18-03-2014, 05:08 PM
CutmasterT CutmasterT is offline
Regular User
  
Join Date: Mar 2014
Location: Essex
Posts: 8
Default
Quote:
Originally Posted by ScoobyStu View Post
Forgive me if I'm wrong but for fast spool wouldn't he be better off fitting a newage top mount and getting something like an SC38?
Yer I did read somewhere that fmic can sometimes cause lag.

I think as mine is a v3 theres a fair bit of work to get a newage top mount to fit, but definitely considering this. I think I might stay with the vf23 and get a larger tmic fitted and go from there. The vf23 seems to be quite good all round - I recon with a map tweak and newage tmic fitted I may see a bit more power maybe not 380 but hopefully 340ish. Is that a realistic aim?
Decisions decisions lol
Cheers all
Reply With Quote
  #15  
Old 18-03-2014, 06:45 PM
scotty's Avatar
scotty scotty is offline
Platinum Member
  
Join Date: Aug 2012
Location: In ma bed
Posts: 5,807
Default
Welcome aboard John good to see you on here .
Reply With Quote
  #16  
Old 18-03-2014, 07:16 PM
ScoobyStu's Avatar
ScoobyStu ScoobyStu is offline
Gold Member
  
Join Date: Jun 2012
Location: Worthing
Posts: 1,527
Default
Quote:
Originally Posted by CutmasterT View Post
Yer I did read somewhere that fmic can sometimes cause lag.

I think as mine is a v3 theres a fair bit of work to get a newage top mount to fit, but definitely considering this. I think I might stay with the vf23 and get a larger tmic fitted and go from there. The vf23 seems to be quite good all round - I recon with a map tweak and newage tmic fitted I may see a bit more power maybe not 380 but hopefully 340ish. Is that a realistic aim?
Decisions decisions lol
Cheers all
Indeed it can but it all depends on if the difference in lag between tmic and fmic is enough to worry about or make a difference to your requirements. If it's a lot of greif to fit a newage tmic, it may be better just to go fmic and also future proof at the same time? I've not really modded mine much but anyone that has will all say, think about what you want and do it once. It gets expensive when you keep changing bits!
__________________
Smiles Per Gallon >>>>>>>> Miles Per Gallon
Reply With Quote
  #17  
Old 18-03-2014, 07:17 PM
ScoobyStu's Avatar
ScoobyStu ScoobyStu is offline
Gold Member
  
Join Date: Jun 2012
Location: Worthing
Posts: 1,527
Default
Quote:
Originally Posted by SilverSurfer View Post
Good to see you on here Mr Baveheart. Sounds like a good service you provide.
+1. Only heard good things about you and your services
__________________
Smiles Per Gallon >>>>>>>> Miles Per Gallon
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 04:38 PM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.