JDM Bugeye AVCS 4EAT Wagon WRX Project(400-450bhp)

[jura11]

Hi guys
This project started if i brought with my brother this Wagon,i know before will be my project car.
Here is my shopping list which i brought and which will be fitted probably this week or next week(i hope this week)

1. Sparco ProADV Blue-Driver side
2. Sparco EVO Blue -Passenger side
3. OMP Trek -Steering Wheel
4. Works Bell Paddle Shifter F1 (imported from Japan)
5. Samco silicone hoses kit(11 piece kit)
4. Mocal Transmission Oil Cooler
5. Defi Guage Pod with Prosport Premium Gauges(Boost,Oil Temp,Oil Pressure)
6. Rear Seats gotta go out(still undecided)
7. Rear Spats + Custom Diffuser
8. Sparco Harness
9. Launch Control(I want Anti Lag but with this Ecu not possible)
10. PSi3 Data Monitor

Here are pics how its look at this time:

Here are some pics from inside and outside

Seats


Paddle shifter


New bumper


Better pics of seats and seatbelts


Inside look


Engine pics 1


Engine pics 2


At this time current spec has been just this

Hi guys here is my and me brother Subaru Impreza WRX Station Wagon 2002,this car its my pride and joy,after some work has been done(we are today managed on Dyno 275BHP at flywheel),and be done(Paddle shift,new steering wheel,Sparco ProADV bucket seats,uprated droplinks and anti roll bars,TD05-18G,STi Injectors,transmission cooler and better suspension Bilstein or Tein).

Actually this is current spec:

TD04 boosted at 1.3bar(flywheel 275BHP)
Hybrid GT FMIC
LPG conversion with bigger injectors(Dyno Tested 265BHP at flywheel)
HKS Suction Induction Kit
Remap by Slowboy Racing-Kent
Blitz Nur Spec R fully decated with uppipe
Cusco front and rear strutbrace
KsWheel X-Power 18" LightWeight Battle Wheels(powder coated white by Ruislip Tyres) with Kumho Ecsta
GReddy Boost and Volt Gauges
Autometer ProShift Rev Counter
Brembo Front and Rear pads
Drilled and grooved Disc(Next year will be fitted Brembo Calipers)
Vis Racing Carbon Fibre Bonnet
Chargespeed Front Bumper with Carbon Ducts

I know more people don't like the stickers,but we are love....Sorry

Part two:

Car has been second time mapped with VF34 and STi Pink injectors and make healthy 350bhp.....
But later we are discover we have piston ring failure on piston no.3 and are two option OE Rebuild or 2.1 stroker,we are decide on 2.1 stroker with some mods
After some discussion with my brother(i don't have heart sold car,which we are spend lot of money,we have some offers around £5k or £5.5k(one guy want this wagon like present for his girl from Norwich)...,and i'm honest guy which never sell car with problems(i don't have heart telling lie to someone,who buying car),yes i know everyone telling lie,but not me!!!)
And we are learn from garage and our mapper we are running low compression on one pistons(he suspect ringland...),
And we are decide,we are going for 2.1 stroker with AVCS,engine will be build Slowboy Racing(Neil know our car from beginning and have good(excellent) reputation as engine builder from some forums 22b,SIDC,Type R-A.co.uk,SN)

Project will start at friday when car going to Neil@Slowboy Racing for biggest upgrade as follows
2.1 Stroker
New FMIC
New H&S uppipe(ol is probably damaged)
Chagespeed full bodykit with sideskirts(maybe with Chargespeed Wings/fenders or ABW WRC Wings/fenders)
New gauges(old one has been stolen form our car,long history...)4X Shadow Premium with Defi pod
MD321 or GT30(standard location turbo)
K&N Big cone Air Fillter
650cc injectors(Thanks Anger)
FPR
Syvecs ECU(finally ALS)
Tein Super Street
K Sport 330mm or 356mm(if i found somewhere at stock)
ARB and droplinks(CDF courtesy probably or Whiteline kits)



Jura

Thanks for any kind comment

[BIG"E"]

Looking GOOOOOOOOOOOOOOOOOD !!

Looks very nice mate. Keep the mods coming,2.1 in a wagon is very different.

[Hongkongfooi]

crikey thats a project! Good choice 2.1......a couple on here have gone/going that route soon

[jura11]

Thanks guys,will be updated later of next week.Car going at Friday and i can wait on transformation of my wagon and later of year drive on Nurburgring or Spa....Can wait...





Jura

[Scooby Hoo?]

Hi Jura.
I was at Neil's on Monday just as the body kit was being delivered and it looks very good . I will pop in and keep an interested eye on your project coming together. Hope your brother is well.
Kind regards Hugh. (White RA with blue graphics if you remember me)

[jura11]

Originally Posted by Scooby Hoo?

Hi Jura.
I was at Neil's on Monday just as the body kit was being delivered and it looks very good . I will pop in and keep an interested eye on your project coming together. Hope your brother is well.
Kind regards Hugh. (White RA with blue graphics if you remember me)

OMG i know you,how is your car?Everything is all right with your car?First time i've seen clean example of RA..
My brother is now at Lebanon,he is flying for BMI,tomorrow coming home and tomorrow we are going to Neil
Again thanks Hugh,i forgot your name,sorry




Jura

[ralliart didz]

thats a wicked bug auto u have there jura,i wouldnt mine having ago with that paddle shift set up,did the gearbox need any mods with all that power. jdm got 200 bhp out of my hawkeye sport,which is wot i want from mine but its finding some1 over here that can do mine.

[jura11]

Originally Posted by didlo

thats a wicked bug auto u have there jura,i wouldnt mine having ago with that paddle shift set up,did the gearbox need any mods with all that power. jdm got 200 bhp out of my hawkeye sport,which is wot i want from mine but its finding some1 over here that can do mine.

Hi matey its straight forward fitting Works Bell Paddle Shifter,if you have JDM autobox is easier to do.I have at home original Sport Shift Steering wheel....
Mine has do Neil@Slowboy Racing,just ask him about this....



Jura

[ralliart didz]

Originally Posted by jura11

Hi matey its straight forward fitting Works Bell Paddle Shifter,if you have JDM autobox is easier to do.I have at home original Sport Shift Steering wheel....
Mine has do Neil@Slowboy Racing,just ask him about this....



Jura

thanks jura11,i will see wot he can do,i would be well happy if he could get me 200 bhp,i will get a turbo 4 next car.still toying with getting a evo 7 gt-a ,they have 276 bhp standerd with a couple of mods 350 bhp which would do me

[jura11]

Originally Posted by didlo

thanks jura11,i will see wot he can do,i would be well happy if he could get me 200 bhp,i will get a turbo 4 next car.still toying with getting a evo 7 gt-a ,they have 276 bhp standerd with a couple of mods 350 bhp which would do me

My brother toying with EVO as next project car,me too....
But scooby is still mine favorite car due nicest sound of flat flour....
You will see,what you can do.....




Jura

[simba]

wow ! that is a interesting project cool

[SUBARMAN]

Hi Jura

That Wagon looks very smart indeed.Looking forward to more news!!

Keith

[Granby]

Makes me want to get another wagon

[Scooby Hoo?]

Hi Jura it was good to catch up with you and your brother today.

SC460 ?

[jura11]

Thanks guys new pics will be available and uploaded maybe next week or after build,this depends if Neil will send some picture...
Our spec is now changing from MD we are going for SC46,we are hoping for at least 450bhp...
ECU will be for this time OE(with ALS via Group N Rom and Mafless feature as well),if money allow at summer will be fitted Syvecs.
And we are go for Cosworth Baffled Sump(Dry sup setup is little bit expensive) and some other mods,which are still under going thinking,as i said we will see...

Hugh good to see you again,hope you will get your RA on track soon.Yes,we are going for SC46.........



Jura

Granby i've seen/read your "Stealth" project nice reading and very interesting at once...
Hope you will get another wagon...

[SUBARMAN]

Originally Posted by jura11

Granby i've seen/read your "Stealth" project nice reading and very interesting at once...
Hope you will get another wagon...

We hope so too!!!

[jura11]

Ok guys toady some parts arrive from USA:


AEM Uego Wideband AFR



Eibach Anti Roll bar kit



GT Spec Cooling Panel(sorry for crappy picture,i'm not best photographer)



Blouch Dominator 3.0XT-R(Billet turbo,here is known as SC50)



Hella Supertone Horns



HKS Oil Cap and Blitz Header Tank Cap




and few days ago arrive CDF Droplink set,really pleased with these





Jura

[C. J.]

are you not having a syvecs ?

[jura11]

Originally Posted by C. J.

are you not having a syvecs ?

At moment no,i go at moment with OE ECU with bigger MAF tube(as MAF have limits)and switchable maps with Group N Rom(which allow run ALS,Speed Density and other functions)
Syvecs will be fitted maybe at May/June if money allow...








Jura

[C. J.]

just if you fitted a syvecs no point in the wide band meter .
just need a sensor to ecu .
job done, one less worry gauge to look at too!

[jura11]

Originally Posted by C. J.

just if you fitted a syvecs no point in the wide band meter .
just need a sensor to ecu .
job done, one less worry gauge to look at too!

Great point,again too fast we are thinking and we are buying what we don't need, typically.
Thanks for that..




Jura

[C. J.]

If it was me i'd find the money for the syvec's ,it'll save you mapping twice and give a lot better results

[jura11]

Originally Posted by C. J.

If it was me i'd find the money for the syvec's ,it'll save you mapping twice and give a lot better results

Yes money we have prepared for SYVECS,but some unexpected problems occurred and we must wait until May/June.
Syvecs is too big and too much for our budget at moment,maybe at May/June.
Syvecs will give me better results and will give me safety feature which i want Knock Correction,due this i don't want Simtek at moment,because this feature is missing.
Really good point,but at moment its not possible.

[jura11]

Little bit update,probably we are going for standard look with standard STi bonnet with standard headlights...



Jura

I can't believe I haven't spotted this thread before!

Thats a stunning wagon matey! Very nice indeed

[Guy B]

Originally Posted by jura11

Little bit update,probably we are going for standard look with standard STi bonnet with standard headlights...



Jura

I hear what your saying with the bonnet Jura but personally I like the lights, makes it look mean as hell
Glad it's all coming along nicley

[AndyWRX]

looks really good fella comming on nicely

[jura11]

Originally Posted by worzel

I can't believe I haven't spotted this thread before!

Thats a stunning wagon matey! Very nice indeed

Thanks you for kind comment




Jura

[jura11]

Originally Posted by AndyWRX

looks really good fella comming on nicely

Thanks for kind comment





Jura

[jura11]

Some sneak pics from Slowboy Racing of mine build,i'm now waiting on some build up pictures

[Chunk]

Nice one mate

Waiting for more pics!!!

Its getting there buddy.

[trails]

a do like a quick wagon...good luck with it

Cant beleive ive missed this thread also.

Great wagon

[jura11]

Some updates:

Car is not still ready,due we are still adding more and more items which we are want to fit such as
Apexi AVC-R(which we are brought new one yesterday)
We are want Anodized Intercooler pipes
GT Spec Headers(Thanks to James@GRD)
HKS Titanium Tip Exhaust with Hayward and Scott Downpipe
We are still considering ROTA G-FORCE,will hopefully look like this


We are brought JDL Bumper Lip and JDL sideskirts,which hopefully will look like this



Engine built has been slowing down on side of Machine shop which where has been engine sent for machine work and skimming and almost 3 weeks took get engine back,hopefully car will be ready in next two weeks.

Thanks guys for kind comments




Jura

[Hongkongfooi]

Only just noticed it's an auto gearbox...will this cope with the new power?

[jura11]

Originally Posted by Hongkongfooi

Only just noticed it's an auto gearbox...will this cope with the new power?

Yep its auto gearbox,probably will cope,but on how long we don't know.Few guy on Nasioc run several months with 500whp on standard 4EAT and we are hopping in this too..
In next month we are going to RedVictor1 which are professionals in building and rebuilding auto boxes and hopefully will make our gearbox stronger which will cope with some addons and 600bhp.
If will be expensive to built only way will be 6speed and paddle shifter from Kaps.


Jura

[ralliart didz]

jura,that pic of the blue wagon looks the nuts and the rear diffuser on the white 1.get some more pics up of your car does the kick down still work on your auto box

[majorscooby]

MMM that looks lush, loving those wheels! Brings back some memories

[SUBARMAN]

Originally Posted by majorscooby

MMM that looks lush, loving those wheels! Brings back some memories

One day you will rise again!!!!! The Squadron awaits............

[jura11]

Originally Posted by didlo

jura,that pic of the blue wagon looks the nuts and the rear diffuser on the white 1.get some more pics up of your car does the kick down still work on your auto box

Hi there here are older pics of mine bugeye wagon,and about the kick down still work but only if i rive in auto mode,not in tiptronic mode.

Wagon look like this when we are brought








Later we are ad some other parts







And now you know how it look,but newer pics i don't have at moment my camera is broken


Jura

[majorscooby]

Originally Posted by SUBARMAN

One day you will rise again!!!!! The Squadron awaits............

I really do hope so keith, i really do !

[SUBARMAN]

Originally Posted by majorscooby

I really do hope so keith, i really do !

We want you back!! After you've been infected with the 555 strain, you only ever leave the Squadron in a box!

[jura11]

Hi guys here are couple of sneak pictures from our build,nearly there and hopefully car will be finished in coming weeks


































Jura

[Guy B]

Looking very nice Jura

[BIG"E"]

Very nice mate.

[jura11]

Thanks guys for kind comment,nearly there can't wait


Jura

[Hongkongfooi]

Looks good matey.....it seems to have taken a while though even by my build standards what's the delay for?

Going to be good. I like the fact you have your own idea's on how you want the engine bay to look. As Mr fooi has said whats the delay?