#1
|
||||
|
||||
Red Barons Wings
This appears to have found its way into my garage!
Shane Last edited by Red Baron; 24-02-2018 at 08:03 PM. |
#2
|
||||
|
||||
Looks like the top of my drive to me.....
Looking good Shane just how a scooby should |
#3
|
||||
|
||||
That looks rather clean. Low mileage as well I bet?
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#4
|
||||
|
||||
Very nice Shane,
I do hope it was worth the Have and enjoy.
__________________
Keep it on the black stuff and leave the pit boards alone |
#5
|
||||
|
||||
Looks lovely - great colour too!!
__________________
Toyobaru 86 with Cosworth exhaust brakes and supercharger, Cosworth mapping, Eibach lowering springs, OZ alloys, fast road geo and various cosmetics. Great fun! |
#6
|
||||
|
||||
very nice and clean mate
|
#7
|
||||
|
||||
Make a change from the usual silver, blue and green, I wasn't sure but it's growing on me along with the grey leather interior.
Looks clean but rear arches and the rear edge of the sunroof need sorting and wheels need a serious refurb (not helped by me grinding the curb after the test drive). Only 61K though with a full history and receipts for over £2k in the last 10 months for Cam belt, pulleys, tensioners, MAF and Lambda from Power Engineering and a new air con condensor and re-gas. Shane (I can see a change of user name coming up, Red Baron perhaps!) |
#8
|
||||
|
||||
Nice, that looks very tidy.
Genuine Speedline ST2's? love that wheel on classics |
#9
|
||||
|
||||
A wave of the magic wand and it's done ...
|
#10
|
||||
|
||||
Looks a very clean classic
__________________
"We're here for a good time, not a long time...." Colin McRae MBE 1968-2007 |
#11
|
||||
|
||||
looks great shane, nice one
|
#12
|
||||
|
||||
That does look clean,welcome to the gang!
|
#13
|
||||
|
||||
Makes a nice change to see a red classic..nice one!!!
__________________
"We're here for a good time, not a long time...." Colin McRae MBE 1968-2007" |
#14
|
||||
|
||||
Looks very nice!
__________________
If it seems that everything is coming your way.... Your on the wrong side of the road! |
#15
|
||||
|
||||
Nice car and gold wheels
|
#16
|
|||
|
|||
Nice one Shane. I will keep an eye out for it.
|
#17
|
|||
|
|||
Me too , not seen a red one for a while now.
__________________
It always wants something |
#18
|
||||
|
||||
Not done an awful lot to her in the last year other than drive her and a service. Had a fresh MOT this morning with no problems and then treated her to a new set of number plates. Following the crowd with a standard size rear plate and a 3/4 size front.
Decat down pipe is next on the list I think and then start saving the pennies for an STI spoiler and get the arches sorted. Last edited by Red Baron; 24-02-2018 at 08:06 PM. |
#19
|
||||
|
||||
Looking good Shane.
I must order some plates up too. Looks so much better with the 3/4 front.
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S |
#20
|
||||
|
||||
Think I'll start copyrighting that design. Your not the 1st one to use exact same colour and design as mine.
|
#21
|
||||
|
||||
I hadn't realised it was exactly the same until I saw the picture of yours last night. I tried it with a red border and a red to silver and it didn't look right, didnt like any of the other logos either.
|
#22
|
||||
|
||||
Biggest form of flattery mate! I think mine will be the same. Maybe it'll become an SES thing!!
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S |
#23
|
||||
|
||||
very nice looking. is it a ppp model, really like the wheels.
|
#24
|
||||
|
||||
No, it has a Prodrive Backbox but following yesterdays MOT we discovered it's actually a modified Newage one. Not sure when the wheels found their way onto it. If anyone has a V6 Prodrive ECU kicking around I could be interested.
Wheels look even better when they manage to keep hold of their Centre Caps!!! Shane |
#25
|
||||
|
||||
Well, more expense, just like any other Scoob, spotted this at the weekend:
So a set of Godspeed grooved disks and kevlar pads going on at the weekend and then bed them in on the way to Brooklands on the Sunday. Going through the paperwork it's had a set of cheap disks and pads in the past from ebay but those pads aren't cheap ones, guess the guy before me put some decent ones in for the track days he did and the disks couldn't cope with the heat they generated. Lucky I spotted it really. Shane Last edited by Red Baron; 24-02-2018 at 08:11 PM. |
#26
|
||||
|
||||
**** ! yep more money to spend least you spotted it mate
__________________
1998 wrx wagon, RB5 , .......... |
#27
|
||||
|
||||
Quote:
Did you go to Alyn at AS Performance? if not you should have done for the new discs...
__________________
Keep it on the black stuff and leave the pit boards alone |
#28
|
||||
|
||||
No i think you could be right there mate, they do appear to be in the wrong way round.
|
#29
|
||||
|
||||
Very well spotted Shane.
|
#30
|
||||
|
||||
Did speek to Alyn but was on a budget and got a deal from Godspeed for disks and pads. Pads were in it when I got it, no idea if they're round the wrong way or not but will double check everything when I change them at the weekend
|
#31
|
||||
|
||||
Good spot that man Perhaps we should call you Hawkeye?
|
#32
|
||||
|
||||
look to be the right way round (otherwise you would see 2 locator pin holes in the pads there?)
Disc looks properly finished! Which pads did you go with from Graham?
__________________
Somewhere drinking Coffee Mapped and maintained by FBTuning 07595 493581. |
#33
|
||||
|
||||
Just his standard kevlar pads Dave, probably similar to the ones I was going to have off you.
|
#34
|
||||
|
||||
Out with the new,in with the old
Picked up a new interior yesterday, leather was nice but a bit slippery and hot when the sun comes out. I must be the only person that fits an older cloth interior in place of a later leather one.
Should have shed a few kilos as well getting rid of the folding rear seats. Old style is just foam and wire Loads of metal on the later ones Last edited by Red Baron; 24-02-2018 at 08:25 PM. |
#35
|
||||
|
||||
they look in good knick, and the colours go well with the red bodywork
|
#36
|
||||
|
||||
A couple of small marks but very little wear, will come up really well with a good clean. And they sit a bit lower so I've gained an inch or so in head room.
|
#37
|
||||
|
||||
Always nice to have a bit more headroom, part of me is tempted to retro fit classic interior in my newage, I still maintain the classic seats are the most comfortable!
__________________
Somewhere drinking Coffee Mapped and maintained by FBTuning 07595 493581. |
#38
|
||||
|
||||
Bloody sun roof restricts my headroom even more so I need every bit I can get. Almost empted to whack a Carbon Fibre roof on it and bin the sunroof rather than get the rust repaired.
|
#39
|
||||
|
||||
Quote:
ps seats look good and in great nick as well
__________________
(1988 wagon)-(2001- saloon with ppp)-(2001 p1)-(2003 wrx with ppp)-(2004 sti)-(1998 type r)-(54 sti)-(55 sti)-(2000 p1)-(55 sti)-(55 sti)-(2008 330s)-(2003 jdm sti) |
#40
|
||||
|
||||
Well, managed a hour or so tinkering time before the thunder storm and finished my DIY PPP conversion.
The car already had the Prodrive back box when I bought it plus the optional Speedline ST2 wheels. First change was the De Cat down pipe, I know the PPP involved binning the centre cat rather than the one in the down pipe but I'm not trying to meet emission regulations, parts to fit it were half the price of the downpipe. A few months ago I picked up a V5/6 PPP ECU and have been running that for the last few months with no problems, this should peak at 1.1 bar rather than the standard ECUs 1 bar. And finally I picked up the proper Intercooler pipework this week. Comparing the original plastic pipework and the replacement Alloy/silicon combination it should improve airflow through the intercooler considerably. It's also nice seeing prodrive written on bits under the bonnet Next stop is SRR next month to see whether I've wasted my money on the ECU or not as I have my doubts over it's authenticity. Last edited by Red Baron; 24-02-2018 at 08:29 PM. |
#41
|
|||
|
|||
Nice one and good luck @ SRR.
Are those ST2's 17" on standard springs? Do you know how roughly how the parts are for the PPP conversion? Cheers |
#42
|
||||
|
||||
Yep, suspension is standard at the moment and the wheels are 17".
Think you were after the cost of the bits for the PPP, not exactly clear: ECU: £100-£150 Backbox: £100 Downpipe: £75 Intercooler Pipe: £25-£50 All prices are second hand obviously and are for MY99/00, not sure if it was available for earlier UK cars. Shane |
#43
|
|||
|
|||
Sorry mate was a long day, lol.
Mines a MY01 so hopefully still compatible! I think that's quite reasonable, if its all plug and play. Thanks for that |
#44
|
||||
|
||||
Original PPP brochure from Subaru and Prodrive
http://www.subaruclub.net/foorum_pic...mpreza-PPP.pdf Is yours a 2001 Bug eye or last of the classics? |
#45
|
|||
|
|||
Last of the classics mate and trying hard to keep it standard but I see things like this and the mind wanders....
|
#46
|
||||
|
||||
Well I'm toying with getting my original ECU remapped in the future so if my current PPP one turns out to be original I'll let you know. Need to save my pennies to get the body work sorted first though.
|
#47
|
||||
|
||||
Couple of minor updates, finally had the old rust bucket dynoed at the SES rolling road day and was chuffed with the results for 15 year old car, running spot on and it's found over 30bhp since leaving the factory.
Since then it's all been cosmetic other than an MOT Zero Sport slam panel and a set of bonnet lifters And then today some silicone coolant hoses that I've had kicking around for months and some fresh paint on the alternator cover and radiator brackets Next stop, rusty wheel arches!!!! Last edited by Red Baron; 24-02-2018 at 08:38 PM. |
#48
|
||||
|
||||
Sell me your wheels
Looking good now. Have you one bonnet lifter or 2?
__________________
2001 Bugeye - Project Black/Red, 1997 JDM Type R, 1995 V1 WRX, Defender Tithonus MOD Styleeee! |
#49
|
||||
|
||||
It's a pair Nick, not enough strength in one to hold it up, may get away with one on an alloy bonnet. Have noticed there's 2 types available for the Classic, the ones on Scotts are shorter and mount on the next wing bolt back which means you can keep the rubber bump stops on top of the wings.
Wheels are staying I'm afraid, don't want to go to 18s and not nothing else in a 17 that I like. Not only that, I'm lucky enough to have a spare ST2 in the garage in perfect condition in case I damage one. |
#50
|
||||
|
||||
I've never driven it in the fog anyway so a splash of paint and some eBay stickers and all sorted.
Last edited by Red Baron; 24-02-2018 at 08:39 PM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|