#1
|
|||
|
|||
Clutch compatibility question
Hi All
Does anyone know for sure if a clutch from a 22B will fit into a Ver5 classic |
#2
|
||||
|
||||
Both 5 speed so yes
|
#3
|
||||
|
||||
Is the flywheel on the 22B not smaller?
|
#4
|
||||
|
||||
Flywheels are the same
Just remember a 22b clutch is twin plate |
#5
|
|||
|
|||
Mmm this is interesting. The clutch that i may be able to use is from a 22B and is twin plate, but one plate has had the edge trimmed. as if to fit a smaller flywheel
Its only done a few hundred miles. Would be great if it fits mine, but ned to be sure. |
#6
|
||||
|
||||
If its the ap one from a uk car give ap a call where very helpful when mine need to be repair even got it done under warranty
If its the clutch from a jap spec car be warned they are know not to last more than 20k Adrian |
#7
|
|||
|
|||
the AP inner plate is "matched" as std to suit a std Subaru flywheel.....................
__________________
ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!! |
#8
|
||||
|
||||
AP RACING CP6082-6GRY - Twin Plate Organic Driven Plates Diameter mm 215 Torque Capacity Nm (lbsft) 480 (350) Year 1999 - 2001 So do you think this will be a straight fit for Martyn's? |
#9
|
||||
|
||||
A stage 1 exceedy takes more than that and will cost you less than £200
|
#10
|
||||
|
||||
The original 22B exedy twin plate was on or off though and not really suitable for daily driving thats part of the reason for AP developing the CP6082-6GRY combined with the taller final drive in the UK22B's.......
Martyn only needs to find out if it will fit his because he needs a clutch and I have this as a spare at a cost of 'nothing' its even cheaper than the stage 1 exedy |
#11
|
|||
|
|||
Quote:
Fingers crossed it will fit. Going to give Jaffa a call, but I know he is just off or already gone to Mauritius , lucky bugger |
#12
|
|||
|
|||
not sure what you class as a "stage 1" but a pukka "pink box organic" uprated Exedy kit is more than £200...............
__________________
ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!! |
#13
|
|||
|
|||
and yes i believe the 22b clutch should fit no problem...........
__________________
ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!! |
#14
|
||||
|
||||
Thanks Alyn, I think Martyns going to sort something with Tone and hopefully it will be a simple fit job, if not, I do know where I can get hold of an original 22B flywheel if its required
|
#15
|
||||
|
||||
Just a quick update...........
22b clutch does not fit Tone's got it apart at the moment, Martyns now trying to source a quick delivered replacement |
#16
|
||||
|
||||
whats the reason for that , Splin ,clutch fork ,slave cylinder ?
__________________
Eat, Sleep, Race , Repeat |
#17
|
|||
|
|||
Doesn't match flywheel , would be ok with flywheel also
|
#18
|
||||
|
||||
When you said twin plate thought you ment the flywheel as well !
If you had said it was just the clutch plates and pressure plate I would of said no !
__________________
Eat, Sleep, Race , Repeat |
#19
|
||||
|
||||
Only what I know from text message (so third hand) but clutch is smaller.....
|
#20
|
||||
|
||||
Would expect the plates to be smaller as there's two of them , and the low tourque rating of the clutch . Think it will turn out better not putting it in any way . Other than the pockets of the Crowman . Silver liners & that it will give him space for some more methane !
__________________
Eat, Sleep, Race , Repeat |
#21
|
||||
|
||||
It is a shame as it would have helped him out a little, being a freebie
He's ordered some new parts, from Alyn ASPerformance IIRC and hopefully Tone will be fitting before he goes off sunning himself...... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|