#1
|
|||
|
|||
overboosting problem
well as the title says i have a overboosting problem i fit another engine to my scooby because me other went pop well at the same time i changed the exhaust, it boost right up to about 19 psi in which i believe is very bad i have got a boost control valve fitted but its not plumb in yet or set up as i don't have the know how on setting it up can any one help me please as not had the car long and not had a lot of luck with it ever
|
#2
|
|||
|
|||
Re: overboosting problem
Hi
Have you rmoved all cats?What exhaust have you fitted, was it system or system and headers? |
#3
|
|||
|
|||
Re: overboosting problem
Have you checked the pipes from the boost solenoid are the right way round. I am sure you have but thought i would mention it. http://www.polarperformance.co.uk/Boostsolenoid.html
|
#4
|
|||
|
|||
Re: overboosting problem
well the car was de cated before i got it so all i did was change the system for a 3" including the decat but the decats looked the same but the one i fittted was wrapped, and its had a stainless mainfold when i got it,
i have checked the vaccum pipes but i will do it again |
#5
|
|||
|
|||
Re: overboosting problem
my boost solinod is different from that one
|
#6
|
|||
|
|||
Re: overboosting problem
Scott would be your man for that question.
|
#7
|
||||
|
||||
Re: overboosting problem
if you have the blue style boost control solenoid, or even a similar one tothe link but with only 2 pipe connections,the plumbing is different and it uses a t-piece and restrictor. Alittle bit complicated to describe unless you have them to hand.
if you are using an aftermarket boost valve (mechanical) then connect this between the turbo outlet nipple (5mm vacum hose) to the boost valve, then the other side of the boost valve the actuator (round thing with a rod coming out of it that connects to the turbo). set the valve so the car runs 0.9-1bar boost. |
#8
|
|||
|
|||
Re: overboosting problem
this is the boost control solinod
[img]http://i653.photobucket.com/albums/uu256/redtoptigra_2009/Photo0051.jpg[/img] |
#9
|
|||
|
|||
Re: overboosting problem
so how would i connect it in to the system do i have to remove my standard boost solonoid or leave it connect where about would i have to put it in, the instruction that i have found on the net are not very helpful to me
|
#10
|
|||
|
|||
Re: My 1st Convoy And South West Motor Show
Quote:
|
#11
|
||||
|
||||
Re: My 1st Convoy And South West Motor Show
left hand drive
|
#12
|
|||
|
|||
Re: My 1st Convoy And South West Motor Show
Lol i knew that hehehehehe. Do we got coppers on this site? coz if so his is left hand drive lmao
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|