|
General Car / Scooby Chat General chat, car related. Threads posted in here may well be re-directed to a more relevant home. |
|
Thread Tools |
#1
|
||||
|
||||
Brake issue
A little help needed, only had my hawkeye for a couple of weeks, on several occasions the engine braking seemed drastic, this evening I got out of the car and noticed a very funny toxic smell from the front wheels, the front discs were boiling hot, only driven 2 miles and didn't brake hard anywhere and it's wet outside.
Can anyone give any advice? Sent from my SM-G900F using Tapatalk |
#2
|
||||
|
||||
Sounds like either one or both the front calipers are binding/stuck.
It's a common fault on the Subaru 4-pot calipers. The only solution is new, refurbed or the cheapest option is to get your current ones stripped cleaned and resealed. |
#3
|
||||
|
||||
As Scott has said, the 4 pots are notorious for sticking, whip the calipers off and see if all the pistons move. You may be lucky and find they're just sticking and need a strip down and clean (contact A S Performance for a new set of seals, dust boots and circlips), otherwise it's time for a refurbed set from the likes of Godspeed.
|
#4
|
||||
|
||||
Many thanks, looks like a weekend job.
Sent from my SM-G900F using Tapatalk |
#5
|
|||
|
|||
Good luck with godspeed they made a complete balls up of refurbing mine.
Try these http://www.brakecaliperspecialists.uk/ they where spot on. |
#6
|
||||
|
||||
As above, good luck with Godspeed, they supplied me with rear hub liners which weren't round. Had to take them to an engineer to get them skimmed!! They denied all responsibility, I should have taken them to court.
|
#7
|
|||
|
|||
You sound like you had customer service i had everyone elses fault but theres.
|
#8
|
||||
|
||||
Had a few sets done by godspeed all with no problems
__________________
(1988 wagon)-(2001- saloon with ppp)-(2001 p1)-(2003 wrx with ppp)-(2004 sti)-(1998 type r)-(54 sti)-(55 sti)-(2000 p1)-(55 sti)-(55 sti)-(2008 330s)-(2003 jdm sti) |
#9
|
||||
|
||||
Must admit, never used his engineering services, only had discs and pads from him and he was helpful, good price and fast delivery.
|
#10
|
||||
|
||||
Actually they supplied rear drums with liners fitted. Had Brentwood at SMD fit them, but from day one they made a noise. Went back to SMD who took them of an found hotspots. Took them to a precision engineer who found them to be oval.
|
#11
|
|||
|
|||
They where fine and helpful while taking my money then problem arrived they did not want to know. Leaving my project 3months behind and me having to falk out another £250.00 for a refurb to sort the issue. And yes i give them a second chance to correct the problem which they could not still get right. There of the shelfs stuff is probly fine as they do not realy touch it but i would not deal with them again specialy after they threatend to take take me to court if i kept going viral with it....... lol good luck with that.
|
#12
|
||||
|
||||
Brake issue
I have had new disks and pads from godspeed and since they have been fitted there is a slight rubbing/grinding noise coming from the back end when cornering and until reading this post I didn't give it a thought that it could be the disks!!!!
Hhhmmmmm....😳 Sent from my iPad using Tapatalk |
#13
|
||||
|
||||
I have managed to fix after a weekend of working on it, all rebuilt and works like a treat.
Sent from my SM-G900F using Tapatalk |
#14
|
|||
|
|||
Good work 👍👍👍
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|