|
|
#2
30-05-2016, 01:48 PM
|
||||
|
||||
They are getting very good press on UK Legacy - given a full set of Meister R's are less than just a new set of Bilsteins for the Spec B you can see the appeal! I've done a bit of research and had a good look at them but having not sen them in the flesh they look far to much like re-branded BC's for my liking.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter 
|
|
#3
30-05-2016, 02:07 PM
|
||||
|
||||
|
I don't think that they are rebranded BC as the team talk about how bespoke the design is as that they have supplied some serious companies.
Too many good reviews too compared to BC's.
|
|
#4
30-05-2016, 04:10 PM
|
||||
|
||||
|
I understood they were the same factory but with bespoke valving and spring rates to give a softer feel. My concern is the quality of the materials - My BC's look like crap after 4 years or so with lots of corrosion & rust and the cars barely been used over that time.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|
|
#5
30-05-2016, 08:03 PM
|
|||
|
|||
|
I have these on my Honda S2000, they are superb, meister r zeta r have pillowball top mounts and 32 dampening settings. I've never had a better set of coilovers and I've had a few sets! Brilliant bang for the buck would definitely have them again without a doubt.
Only one down side, keep bloody playing with them to get them set how you want it!
|
|
#6
30-05-2016, 08:50 PM
|
||||
|
||||
|
Quote:
|
|
#8
02-06-2016, 08:38 PM
|
|||
|
|||
|
Quote:
|
|
#9
06-06-2016, 03:20 PM
|
||||
|
||||
|
I picked up a set of these for my wagon a week or so ago, following quite a lot of rummaging on the net and some fairly useful discussion on scoobynet (believe it or not!). Haven't fitted them yet but aim to do so in the next few weeks, to replace the crashy and noisy used HSDs I had fitted last autumn, to much dislike from SWMBO.
From what I've read online, they are better than BCs for a similar price.
__________________
JDM twinscroll Legacy wagon [previously blob WRX/PPP wagon, killed @ Silverstone Feb 2019]
|
|
#10
27-06-2016, 01:07 PM
|
||||
|
||||
|
First impressions of the MeisterRs are very good. I've only done one journey to work and back so far, having set them to 10 clicks from softest all round (32 clicks is the full range). They are much more comfortable than the HSDs that were removed, and ride nicely. Haven't had a geo setup yet nor driven far without traffic, so can't really comment on their performance further than that.
__________________
JDM twinscroll Legacy wagon [previously blob WRX/PPP wagon, killed @ Silverstone Feb 2019]
|
|
#11
09-07-2016, 11:29 AM
|
||||
|
||||
|
First drive this morning with the missus on board, and she gave it the thumbs up! Getting the geo alignment done now, will see what difference it makes
Sent from my D5803 using Tapatalk
__________________
JDM twinscroll Legacy wagon [previously blob WRX/PPP wagon, killed @ Silverstone Feb 2019]
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
