Rear light gaskets

[T1NY.]

Anybody know where i can get a pair of these? Looking on the internet and can only find some in america, is it gonna be a subaru only item?

Sent from my SM-G955F using Tapatalk

[scooby doo]

Try ICP or I imagine be subaru

[T1NY.]

Yeh my 1st thought was icp but couldnt find them on the web page or ebay store, might give them a call after the break

Sent from my SM-G955F using Tapatalk

[Neil97rs]

If not will probably be main dealer part but should still be available you may have to wait for them
But icp can get most parts

[SpecB]

If you are talking about the foam gasket they are easy enough to make from a blank sheet of foam - thats how I made mine for the bugeye

[T1NY.]

yeh thats the 1 mate, i have water getting in in my bugeye somewhere and i have changed the boot seal but no change, strut towers seem ok, but last winter i did notice 1 of the tail lights came with a pond so gonna do the light gaskets and see if that gets it,

SpecB, how thick foam did you use on yours?

[Red Baron]

Not sure what the gap is between the back of the light and the rear panel but have you tried something like this:

https://rover.ebay.com/rover/0/0/0?m...2F282259968136

When I put a new rear light in my old Nissan it came with a roll of this in the box, it's a bead of bitumen sealant you put round the light cluster where it meets the metal bodywork and seals everything up watertight.

[SpecB]

Originally Posted by T1NY.

SpecB, how thick foam did you use on yours?

I can't remember the thickness it was from eBay and was actually self adhesive on one side.