|
|
#1
16-09-2012, 04:02 PM
|
||||
|
||||
Tuner Nut - Recomendations
Has anyone got any recomendations for a set of tuner nuts.
I would prefer Black Anodised, and like the idea of the tuner type fitment. Ths gives a bit more clearance for the wheel wrench thus preventing wheel damage when removing/fitting. I have just bought a set but the bite/contact point on the wheels is probably less than 50% that of the nut it replaces. So I'm not to keen too fit them. I also noticed that these ones are hollow all the way through so water/dirt can get through to the thread and will probably cause them to sieze on, at some point. Show us your nuts !!! 
|
|
#2
16-09-2012, 05:22 PM
|
||||
|
||||
|
Also interested in this
 I've just had a cheapish set of chromed steel tuner nuts on mine for the last few years, seem to lasted wheel enough but the chroming is starting to crack off and theres rust spots on some of them too. These are cheap but not sure on the quality - http://www.ebay.co.uk/itm/20-x-ALLOY...item20c4c1fc42
|
|
#3
16-09-2012, 05:25 PM
|
||||
|
||||
|
Quote:
|
|
#4
16-09-2012, 05:39 PM
|
||||
|
||||
|
Can you take a picture of the face of one of them alongside one of your existing nuts?
They pretty much look just like a black anodized version of what i'm using without any problems...
|
|
#5
16-09-2012, 11:47 PM
|
||||
|
||||
|
Muteki do closed end lug nuts, I have some zenky racing lug nuts which are nice but open ended
There's a few on here that could suit..... http://www.rallysportdirect.com/Lug-Nut
__________________
If it seems that everything is coming your way.... Your on the wrong side of the road! 
|
|
#6
17-09-2012, 12:41 AM
|
||||
|
||||
|
as long as there a 60 degree taper they should lock tight.i need some for my mitsi,was thinking of these
|
|
#7
17-09-2012, 12:43 AM
|
||||
|
||||
|
these
|
|
#8
17-09-2012, 06:56 AM
|
||||
|
||||
|
I think someone had an issue with those twisting -think it was Rich (Major Scooby)
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|
|
#10
17-09-2012, 11:42 PM
|
||||
|
||||
|
i've got these on mine http://www.ebay.co.uk/itm/20 x alloy item number 230699002854 got 4 spare if you wanna try them scott.
lee.
|
|
#11
20-09-2012, 09:47 AM
|
|||
|
|||
|
Quote:
I have purchased another set exactley the same and have Had no issues so far. Although I've heard the D1 spec nuts can come loose after a good hard track session of them getting hot?!?. I had the same thoughts and concerns as you Scott of the 50% contact area after buying some turner wheel nuts and mentioned the problem to you when we was at the breakfast meet a while back if you remember. I wasnt keen on keeping them on either so off they came after a generous donation of some D1 spec nuts from crowman.
__________________
Cooper man!!!!!
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
