Wiring diagram for classic and blob

[Tyler]

Does anybody have wiring diagrams for both blob sti and a MY 98 classic. I am fitting a newage dash to my classic and need diagrams of all wires connect to Dash so I can cut and solder in place new electrics, including the clocks etc. Must have colours of wires please.

[Mortster]

Have a search on SN, someone posted it up there about a year ago with the wiring diag too. I might have book marked it, but I'm not home at the mo.

[Tyler]

Cheers bud, think I have found a 2004 diagram which I assume is the same as a 2003 blob, but having problems with My 98

[Ginola]

Originally Posted by Tyler

Cheers bud, think I have found a 2004 diagram which I assume is the same as a 2003 blob, but having problems with My 98

They are the same 2003/2004 UK but are different for JDM, and 2005 UK is again different from 2003/2004 or 2006 on (As I found out when wiring up an avcr!)

[Ginola]

Originally Posted by Tyler

Cheers bud, think I have found a 2004 diagram which I assume is the same as a 2003 blob, but having problems with My 98

They are the same 2003/2004 UK but are different for JDM, and 2005 UK is again different from 2003/2004 or 2006 on (As I found out when wiring up an avcr!)

The full workshop manual can be downloaded its a 148mb of stuffz with pdf index etc, I'll try and dig a link out later tonight if you haven't had any luck.

[Tyler]

Originally Posted by Ginola

They are the same 2003/2004 UK but are different for JDM, and 2005 UK is again different from 2003/2004 or 2006 on (As I found out when wiring up an avcr!)

The full workshop manual can be downloaded its a 148mb of stuffz with pdf index etc, I'll try and dig a link out later tonight if you haven't had any luck.

Cheers bud, I want to get the sti jdm clocks that do the defi sweep installed, did they do that on the UK cars ?

[Ginola]

Originally Posted by Tyler

Cheers bud, I want to get the sti jdm clocks that do the defi sweep installed, did they do that on the UK cars ?

Yes on hawks etc, but not blobs, should be doable though I think there is a guide for that on scoobynet if not im sure there will be one on NASIOC. They where installed on JDM blobs though

[Ginola]

Have a look here := http://ken-gilbert.com/impreza-manuals

[Tyler]

Cheers bud, not sure if it is going to be possible as have been told that all the voltages are different for the heater controls etc. Going to still have a look though..