Spec C manifold fuel rails

[jura11]

Hi guys
i've slight problem with Spec C fuel rails,i've bought wrong one fuel rails and these will not fit our Spec C manifold

I'm now thinking who can do something like custom adapters for Spec C?

Thanks for any help guys,if someone will point me right direction i will be very appreciated.


Thanks,Jura

[SpecB]

I had the same issue - in the first instance we (C.J. and I) made our own, simply a flat plate and washers, I then redid the brackets using a thick piece of Aluminium - any decent garage/fabricators should be able to knock something up. I know one of the US companies do them but I couldn't get them to sell them to me separately (Gruppe-S I believe).

My final solution was to get some parallel rails for the Spec C manifold from Chy at Pennine Subaru.

[DukeBoy]

What rails have you got?

[jura11]

Originally Posted by BlueBugEye

I had the same issue - in the first instance we (C.J. and I) made our own, simply a flat plate and washers, I then redid the brackets using a thick piece of Aluminium - any decent garage/fabricators should be able to knock something up. I know one of the US companies do them but I couldn't get them to sell them to me separately (Gruppe-S I believe).

My final solution was to get some parallel rails for the Spec C manifold from Chy at Pennine Subaru.

Which one you have before Fuel rails?

I was contacted few guys for help,if he can do something like you are did,just waiting and hope so someone will reply on questions.

Gruppe-S i know,but i'm not prepare wait another few weeks and buy complete kit,not now,i'm little bit in hurry.


Pennine Subaru do Spec C fuel rails?That's the interesting.

Originally Posted by DukeBoy

What rails have you got?

CDF fuel rails,which are for WRX not Spec C,he at moment doing Spec C,but what i know still are unavailable and people waiting on them.

Jura

[SpecB]

I was using the Perrin rails on the manifold with the 'plate' adaptors. I might have them kicking about somewhere - they basically bolted onto the manifold then the rails bolted onto them spacing it out to fit.