Whiteline parts...

[Rdlangy1]

Hope everyone had a good Xmas??

Advice really - gonna give alyn a call when he's open again for whiteline parts, but wondered if anyone could advise whether I'm looking at unnecessary bits...

Car will be fast road, and hopefully occasional track day (sad won't be ready for ring this year ).

Thinking of:
Whiteline adjustable rear sway bar - BSR33z
Whiteline front sway bar adjustable link set - KLC139
Whiteline rear sway bar links kit - KLC261
Whiteline front and rear control arm kit - KTA109
Whiteline anti lift kit - KCA359
Whiteline steering rack mounts (bushes) - KSR202
Whiteline positive shift kit bush - W0584
Whiteline front adjustable sway bar - BSF33z
Whiteline roll centre kit - KCA313

Love people's advise as always...car is 12yrs old so imagine most bushes are nearly had it...

Thanks

Ryan

[Banstead Stig]

You might like to consider adding the subframe locking bolts to the list.

They're a useful and inexpensive modification in my opinion.

[Rdlangy1]

Appreciate that - although read somewhere they can damage the subframe?

Thanks for any and all advice

Ryan

[Banstead Stig]

They come with a disclaimer about early chassis wear, but I believe that's simply to cover the manufacturer rather than due to it being a genuine problem.

I would be interested to know what you read.

I'm sure someone more knowledgeable than me will chip in. Alyn will probably have a view too.

[Rdlangy1]

Ahhh ok...well then i appreciate your input as much as any other...thank you..

I'll ask alyns opinion to..

Thanks for your input

[Hongkongfooi]

personally wouldn't go for whiteline arb as they rust like a bastard. I have eibach on the p1 and so much better made.
Roll centre kit is a worthwhile upgrade. As you say the change in bushes will show a big difference. Doing all those mentioned will make the car feel new.
I did go for the diff bushes but removed them due to the whine noise.

[Rdlangy1]

Thanks hong kong...will look into eibach arbs instead whiteline when speak to alyn...

Yeah hoping new bushes should tighten everything back up...bate ring feels very loose and car generally needs tightening...

Ryan

[C. J.]

I'd buy the whiteline arbs over Perrin , made of far better materials. Ayln will tell you the pitfalls of both

[555_Si]

I got whiteline stuff and they do rust, but just get them painted when they start to go. Use subframe lock boots with no problems.

I used super pro roll centre kit as looked better than whiteline.
Bushes I used a mixture of whiteline and power fled I think.

[555_Si]

Also look at beefing up rear arb mounts.

[Rdlangy1]

Thanks c.j and si...

So when u say about beefing up rear are mounts, is this with another whiteline kit/part ??

Also was thinking 22mm arbs front and back - or would 24mm on rear be better?

I've looked for adjustable arbs over the fixed - assuming this is a better option?

Ryan

[C. J.]

24mm front and back
Rear arm mounts tend to bend when you update arbs so they do a updated mount.
I'd personally ring Ayln and go through your list his a onist chap and only sell you what you need

[Rdlangy1]

Yeah I know - he's fantastic - helped me out loads over last few months.

Anyone know when he's open again?

Ryan

[scotty]

Originally Posted by Rdlangy1

Yeah I know - he's fantastic - helped me out loads over last few months.

Anyone know when he's open again?

Ryan

5th of January mate .

[555_Si]

as CJ said, there is a whiteline rear mount kit that replaces standard, also i went 24mm fromt and back for track day use. i got adjustable rear so could tune it if need be.

[Scott.T]

CDF ARB's ?

http://www.cdfracing.co.uk/index.php?cPath=121

[Rdlangy1]

Thanks Scotty...

And cheers si.. So is adjustable on front pointless?

Really appreciate everyone's feedback...

And surfer - I looked at the CDF parts as they are only 20min drive from me in Rochester, but there bits seemed a little more expensive than whiteline.

Maybe as they are better? Don't know...

Ryan

[C. J.]

No not point less have used front soft and rear hard and visversa

[Rdlangy1]

Ok so just adjustable on rear...thanks

[scottpolestar]

Ive got cdf bars for my project and there great. I was once told they are whiteline bars just powdercoated orange to last longer.

[asperformance]

can go through things in far more detail when back in the office but the SuperPro and Whiteline droplinks are about the only ones i would change to - the solid style ones are WRONG for most cars and simply induce binding IMO

Eibach bars are very good quality with the only downside being they are of the fixed variety
Eibach coating is superior to Whiteline but as above you could simply get the W/line powdered before installation as the material is correct

[Rdlangy1]

Thanks Alyn! And everyone else for ur inputs

I'll be in touch on the 5th jam

[Rdlangy1]

Well ordered all the bits today from Alyn...
Went eibach arb and whiteline everything else..
Great service from Alyn as always.
Now to save for having them fitted! Ha ha

[Rdlangy1]

All bits and car down with Jules for fitting - collect tues! So excited