A Bit of Info Please

[raz6589]

Hi guys an gals.
A bit of information needed from the knowledgeable please. 97 UK classic impreza rear exhaust bracket. The one that bolts to the nearside rear chassis leg. Mines snapped on the bend/fold. Should i buy new ?. Would one from a newage fit ? Should i buy a piece of ali and make my own ?
Also, While looking underneath, it looks manky. Whiteline anti-roll bars look pants. Paint flaking and going rusty. Anyone know where to get them blasted and powder coated. Or is that a bad idea and just get them blasted an shake a rattle can at them.
Many thanks

Dave

[Scott.T]

Hastings powder paints would clean the arb up.
Newage bracket is too long and dome don't use then do I wouldn't worry.

[raz6589]

Thanks for the quick reply Scott. Will give them a bell. Would still like to replace the exhaust bracket. Will let you know how i get on.
Thanks
Dave

[Scott.T]

Originally Posted by raz6589

Thanks for the quick reply Scott. Will give them a bell. Would still like to replace the exhaust bracket. Will let you know how i get on.
Thanks
Dave

If you have more then 1 item to take it would be worthwhile. You may get 6-8 bits done for the same price as one. So I would take the ARB brackets aswell, at least.

If you want STi pink he has some as he done my springs, and I had to order in the powder special. But he has plenty of other choices.
If you know where Vince is at RDS, then Hastings Powder is next door.