South East Scoobies  

Go Back   South East Scoobies > The Garage > Engine Management
Reload this Page random cutting out
FAQ Calendar

Engine Management For all your mapping,diagnostics and electronics

Reply
 
Thread Tools
  #1  
Old 14-06-2009, 12:23 PM
Gunner Gunner is offline
Regular User
  
Join Date: Sep 2008
Posts: 23
Default random cutting out
hi all ive been suffering a problem with my car thats been going on for a few weeks, it started off by hearing a click which turned out to be my boost solinoid and a instant loss of power and some times a back fire. then driving along the m3 same click but engine totally cut off but restarted when i tried. this went on for a while until one day i went to turn it on and nothing happened at all, i turned the ignition on and didnt hear the fuel pump prime, had someone look at it thinkin it was the pump but he put a live feed in from my lighter and the pump worked no probs so this led me to think it was an issue with my immobiliser but i had some one else bypass it and i still had the same problem. started thinking it was a wiring fault as i was fiddling with the harness next to the battery and my boost solinoid kicked off clicking away like mad and the fuel pump turned on. so i removed the washer bottle and checked the elec plugs behind washer bottle and the snag went away for a bit, then driving along one day and it started doing it again and messing with the plugs made no difference so i turned my attention to my ecu. took all the plugs off and refitted them and when i put the last on on my fuel pump started working again, could it be that my ecu is buggered?? its a standard 4 plug 93 wrx ecu with a polar perfomance chip fitted but been running the chip for over a year without a problem.
any ideas guys??? thanks jay
Reply With Quote
  #2  
Old 17-06-2009, 01:37 PM
Gunner Gunner is offline
Regular User
  
Join Date: Sep 2008
Posts: 23
Default Re: random cutting out
any ideas anyone?? it was doing it again yesterday and i removed the bottom plug from my ecu and that fixed it for a while, is there anyway of testing the ecu or should i just replace it???
Reply With Quote
  #3  
Old 18-06-2009, 09:47 AM
worzel
Guest
  
Posts: n/a
Default Re: random cutting out
Not a clue.


Scott...... heeeeeellllllppppppp!
Reply With Quote
  #4  
Old 18-06-2009, 11:31 AM
Crowman
Guest
  
Posts: n/a
Default Re: random cutting out
I am sure that someone will have a standard 4 plug ecu kicking about.

Scott may have something for you to try.

Its more likely a device conected to the ecu causing the problem, when you remove the plug, you may be removing the signal wire, thus clearing the problem.

Try another ecu and go from there.

Craig on here might well have a spare
Reply With Quote
  #5  
Old 18-06-2009, 11:58 AM
Gunner Gunner is offline
Regular User
  
Join Date: Sep 2008
Posts: 23
Default Re: random cutting out
thanks for the replys guys i will try a different ecu
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 03:11 AM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.