South East Scoobies  

Go Back   South East Scoobies > The Garage > General Mechanics

Reply
 
Thread Tools
  #1  
Old 06-06-2013, 02:40 PM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,062
Default Coolant/water levels

Been keeping an eye on the water level since my last post as previous owner had filled the expansion tank to the very top, so syphoned it out until it was between low and high. I have used it a bit this week and temp gauge reads normal, doesnt change on boost etc, but every now and then it smells a bit 'radiatory' and if I pop the bonnet after a spirited drive there are bubbles in the expansion tank (like its boiling), though the level is still just below full. Does this sound normal?
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S
Reply With Quote
  #2  
Old 06-06-2013, 04:16 PM
GB270Adam's Avatar
GB270Adam GB270Adam is offline
Bronze Member
 
Join Date: Jun 2012
Location: Hove
Posts: 377
Default

Wanna check you're header tank as well mate, make sure that is filled pretty much too the top, could just be that the car gives off that smell, obviously all cars are different, might be worth having a pressure test done for peace of mind.
__________________
If I'm not in action I'm in traction
Reply With Quote
  #3  
Old 06-06-2013, 04:20 PM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,062
Default

Yeah, header tank level stays fine too. Cheers.
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S
Reply With Quote
  #4  
Old 06-06-2013, 08:37 PM
jameswrx jameswrx is offline
Regular User
 
Join Date: Sep 2012
Location: brighton
Posts: 18
Default

check all around your walter pump they are know to leak around there.
Reply With Quote
  #5  
Old 06-06-2013, 08:49 PM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,062
Default

Looks like it has a cheapy fake Sti cap that doesn't look to good so going to replace that with a proper one.
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S

Last edited by Lucky; 06-06-2013 at 09:21 PM.
Reply With Quote
  #6  
Old 06-06-2013, 10:18 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Hate to bring this up but mines doing exactly the same but it looks like mine is the head gaskets!

It's either the rad cap gone and allowing the water to boil as its not under pressure the pressure pushes water out and you have a full overflow tank and a half empty header tank.

Or as it looks in my case, the H/G has gone as the combustion gases are passing it into the coolant over pressuring the system and causing overflow and an almost empty header tank.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #7  
Old 06-06-2013, 10:39 PM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,062
Default

Yes mate, going to change the cap and hopefully that'll do the trick. The one in it is a fake Sti one that doesn't seem to seal very well.

Hope you get yours sorted and it turns out to be less serious.
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S
Reply With Quote
  #8  
Old 07-06-2013, 06:25 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
 
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default

Quote:
Originally Posted by Lucky View Post
Yes mate, going to change the cap and hopefully that'll do the trick. The one in it is a fake Sti one that doesn't seem to seal very well.

Hope you get yours sorted and it turns out to be less serious.
I would put a normal cap on rather than an STI one aswell if your worried about pressure 0.9 vs 1.2 bar
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #9  
Old 07-06-2013, 07:11 PM
Anger's Avatar
Anger Anger is offline
Platinum Member
 
Join Date: Oct 2008
Location: Bletchingley Surrey
Posts: 4,973
Default

My STi one played up at the ring last year, put the standard one back on and it was fine
__________________
"We're here for a good time, not a long time...." Colin McRae MBE 1968-2007
Reply With Quote
  #10  
Old 07-06-2013, 07:25 PM
BIG"E"'s Avatar
BIG"E" BIG"E" is offline
Events / Ring Trip Organiser
 
Join Date: Sep 2008
Location: Hastings
Posts: 8,913
Default

Quote:
Originally Posted by BlueBugEye View Post

Or as it looks in my case, the H/G has gone as the combustion gases are passing it into the coolant over pressuring the system and causing overflow and an almost empty header tank.
Oh thats not good..
__________________
Keep it on the black stuff and leave the pit boards alone
Reply With Quote
  #11  
Old 07-06-2013, 08:55 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Engine out time I think!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #12  
Old 07-06-2013, 10:17 PM
Anger's Avatar
Anger Anger is offline
Platinum Member
 
Join Date: Oct 2008
Location: Bletchingley Surrey
Posts: 4,973
Default

When I cracked my 2.1 it did the same... Hope it's the cheap option Lucky
__________________
"We're here for a good time, not a long time...." Colin McRae MBE 1968-2007
Reply With Quote
  #13  
Old 07-06-2013, 10:40 PM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,062
Default

Quote:
Originally Posted by Anger View Post
When I cracked my 2.1 it did the same... Hope it's the cheap option Lucky
Think so James. Its behaving itself apart from that. The levels are all fine etc even after a blast and its not loosing any water so will change the cap and empty/refill the system in case there is any air in it and go from there.

Cheers for everyones advice.
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S

Last edited by Lucky; 07-06-2013 at 10:46 PM.
Reply With Quote
  #14  
Old 07-06-2013, 10:48 PM
Steve_PPP's Avatar
Steve_PPP Steve_PPP is offline
Admin, Meets/Events Organiser
 
Join Date: Sep 2008
Location: Burgess Hill, Sussex
Posts: 13,283
Default

Thats a sh*tter Nick Hope it doesn't end up too expensive.
Reply With Quote
  #15  
Old 08-06-2013, 01:21 AM
Ginola's Avatar
Ginola Ginola is offline
Moderator
 
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default

Quote:
Originally Posted by BlueBugEye View Post
Engine out time I think!
Meh
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 02:40 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.