#1
|
||||
|
||||
Installing a Wallbro 255
I am just installing a wallbro 255 fuel pump and was wondering i should remove the rubber at the bottom as it does not seem to be very secure.
Also should i use any zip ties to secure the pump or is petrol too corrosive? Pic's below..
__________________
1.6 Terzo........ Non turbo.............http://www.surreyscoobies.co.uk/foru..._vehicle&id=87 |
#2
|
|||
|
|||
the Walbro uses its own specific sized rubber locator..............
__________________
ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!! |
#3
|
||||
|
||||
Do you have one by any chance or now where i can purchase one from?
__________________
1.6 Terzo........ Non turbo.............http://www.surreyscoobies.co.uk/foru..._vehicle&id=87 |
#4
|
||||
|
||||
Should come with one
__________________
Eat, Sleep, Race , Repeat |
#5
|
||||
|
||||
brought it off another user CJ
__________________
1.6 Terzo........ Non turbo.............http://www.surreyscoobies.co.uk/foru..._vehicle&id=87 |
#6
|
|||
|
|||
why dont you just slide the pump down a bit to hold it in place, i dont think mine came with a different rubber foot, but in fareness it was about 5 years ago I did mine
Brad
__________________
570bhp @ 2.1bar |
#7
|
||||
|
||||
Thats what i did, just wanted to see if anyone else did the same thing.. Cheers Brad..
__________________
1.6 Terzo........ Non turbo.............http://www.surreyscoobies.co.uk/foru..._vehicle&id=87 |
#8
|
|||
|
|||
i will have some spares, as CJ states they come in brand new kits and aren't as expensive as peeps think.............
__________________
ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|