South East Scoobies  

Go Back   South East Scoobies > The Garage > Engine Management
Reload this Page Blobeye MAF sensor
FAQ Calendar

Engine Management For all your mapping,diagnostics and electronics

Reply
 
Thread Tools
  #1  
Old 02-07-2016, 07:34 PM
HYDROSCOBY's Avatar
HYDROSCOBY HYDROSCOBY is offline
Bronze Member
  
Join Date: Aug 2013
Location: eastbourne
Posts: 496
Default Blobeye MAF sensor
Hi guys, I was wondering if anyone has got a working MAF sensor that I could plug in and see if that works, I got a new one but car is running worse now? I got the new part of ebay so I suspect that it dosnt work. I dont want to buys a new one for 250 and find out that its not the problem. The car keeps going into limp mode thanks in advance
Reply With Quote
  #2  
Old 02-07-2016, 08:14 PM
Mortster's Avatar
Mortster Mortster is offline
Gold Member
  
Join Date: Apr 2009
Location: Milford, Surrey
Posts: 2,432
Default
http://www.ebay.co.uk/itm/NEW-GENUIN...EAAOSwpDdVH6a~

Check all the earths to the engine first , I had a similar problem, went through a copy MAF, then a real one, only to discover by accident that the right hand earth to the inlet manifold was loose!
__________________
2001 Bugeye - Project Black/Red, 1997 JDM Type R, 1995 V1 WRX, Defender Tithonus MOD Styleeee!
Reply With Quote
  #3  
Old 02-07-2016, 08:20 PM
HYDROSCOBY's Avatar
HYDROSCOBY HYDROSCOBY is offline
Bronze Member
  
Join Date: Aug 2013
Location: eastbourne
Posts: 496
Default
Quote:
Originally Posted by Mortster View Post
http://www.ebay.co.uk/itm/NEW-GENUIN...EAAOSwpDdVH6a~

Check all the earths to the engine first , I had a similar problem, went through a copy MAF, then a real one, only to discover by accident that the right hand earth to the inlet manifold was loose!
Thanks I will go and check them all then

Thats the exact one I got and from the same seller but when I changed it over it was idling badly with no power. Thanks thou
Reply With Quote
  #4  
Old 03-07-2016, 08:59 PM
HYDROSCOBY's Avatar
HYDROSCOBY HYDROSCOBY is offline
Bronze Member
  
Join Date: Aug 2013
Location: eastbourne
Posts: 496
Default
After taking the earthing leads of and cleaning them up, it seems like it is running better but not 100% yet
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 04:03 PM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.