|
Engine Management For all your mapping,diagnostics and electronics |
|
Thread Tools |
#1
|
||||
|
||||
Fitting AVCS Heads to non-AVCS car
Right trying to tie up the techy questions for my engine build.
If I fit AVCS heads e.g. ebay link I'd most likely get mine from Saj though. I know it's possible to run them with Syvecs which I would get Simon (JGM) to fit for me, but what do I need to do at the engine end of the wiring harness to adapt my now redundant tumbler wiring to run the AVCS. Also can I drive the car on the std (Ecutek'd) management without the AVCS from LA to surrey rolling road to get it fitted? If this looks to be too much of a hassle I'll just stick with my heads and spend the syvecs money on a new turbo!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#2
|
||||
|
||||
As said on the boat , you can drive with the AVAC's heads not connected . They will just stay in the closed position and give you their lowest cam position .
Weather you go avacs or not simtec or syvecs will give you a better result over free software or ecutek. Syvecs being better than simtec in my view having had both
__________________
Eat, Sleep, Race , Repeat |
#3
|
||||
|
||||
whats the difference between simtek and syvecs?
|
#4
|
||||
|
||||
jgm would be better to anwser but i'll have a go !
Syvecs Boost control is spot on ,tellit 1.5 and thats what you get ,flat line to the end Data logging anti lagg as standard launch control as standard 8 mapps with 4fuels maff less active nock control shift light puts cel light on after 3 nocks full throttle shifting when switch fitted to clutch Simtec boost control dipped abit but was still goodwhen compared to ecutek, but nothing like syvecs maff less shift light anti lagg and lauch control extra i'm sure there is more
__________________
Eat, Sleep, Race , Repeat |
#5
|
||||
|
||||
Looks like I'm forming a plan - funds are in place (ish) just a few details to tie up then it's a go!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#6
|
|||
|
|||
Simtek is very good.. Syvecs is better still.. if budget allows then syvecs no question, if not the simtek is still very good.
both are very keenly priced for what you get when compared to motec for example. Simon |
#7
|
||||
|
||||
Hi Simon -I'll be in touch in a month or so to get the syvecs fitted! Just got to get the engine out of mine and over to Andy so he can finish the build!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#8
|
|||
|
|||
no worries, drop me a line if I can help at all
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|