|
|
#1
05-06-2018, 09:58 PM
|
||||
|
||||
Bugeye sti hid into wrx.
Any members on here done this conversion with the jdm version and have a wiring diagram that I could follow?
Regards Benji 
|
|
#3
05-06-2018, 11:15 PM
|
||||
|
||||
|
Hopefully there's a guide around . Morrettes are in ATM but not really looked into how there wired in yet Or even look at the hid projectors either but gathered wouldn't go straight in.
|
|
#4
06-06-2018, 10:47 AM
|
||||
|
||||
|
I had them in the bugeye but I used a conversion loom which is no longer available which also fixed the levelling function as well. Mine were also wired so the indicators were the side lights and vice versa
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|
|
#5
06-06-2018, 11:03 AM
|
||||
|
||||
|
Was this the loom kit form the the guy in Canada ?
|
|
#6
06-06-2018, 11:16 AM
|
||||
|
||||
|
Also any one know what a good condition set of bug morrettes go for now?.
|
|
#7
06-06-2018, 02:10 PM
|
||||
|
||||
|
Mine was from a guy who went by the username of WagonsHo on scoobynet it came from a company called Chang fo imports I think. The key thing is to make sure that you earth the Ballasts to a fixed point rather than the switched earth in the loom so they stay on with high beam otherwise you get total darkness for a second when coming off high beam
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|
|
#8
06-06-2018, 03:13 PM
|
||||
|
||||
|
Quote:
|
|
#9
06-06-2018, 05:21 PM
|
||||
|
||||
|
Quote:
|
|
#10
06-06-2018, 06:36 PM
|
||||
|
||||
|
https://f30.bimmerpost.com/forums/sh....php?t=1459296
Not sure if this is applicable to your post but mentioning as on a pre ring check an enquiry was made on mine without headlight washers mine could be a failure. Turns out fitted in Japan with pictures to prove so mine ok without the washers.
__________________
Type 25 + 96 jdm sti wagon  sti 05 ppp - gone but not forgotten 
|
|
#11
06-06-2018, 06:52 PM
|
||||
|
||||
|
I'm using jdm headlights not the U.K. version so the hid are factory build into the headlights so I'm not sure if that counts the new rule. I need to sit down with headlights out and start working it all out. So much to bits to get on with ATM,
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
