#1
|
||||
|
||||
Gearbox mount
Thinking of things to do before the ring trip and I’m planning on fitting a group N STI gearbox mount. Is this a job I can do easily on the drive? I was thinking of getting the front up on ramps then using a Jack or axle stands to support the box while I dropped the cradle and swapped the mount out.
Are the support bushings worth doing at the same time?
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#2
|
||||
|
||||
If its like an impreza than yes, and there actually comfy too,
The White Ra i had i fitted full Grp n kit and was very pleased with it, worth doing if you haven't the dogbone mount to this helps lateral movement |
#3
|
||||
|
||||
PS i've been doing the same this week with the R32 box and dog bone mounts getting bits ready for my ring trip and odd TD ive got planned in..
|
#4
|
||||
|
||||
I'm going with Group N Pitch mount and Gearbox mount as well as the whiteline crossmember pad bushing - unfortunately there aren't any uprated engine mounts for the H6!
I'm also doing front ARB (or possibly just bushes as I like the balance with just the rear uprated) and steering rack mounts to try and finally get rid of the knock from the front left as they are the only parts not replaced or uprated!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#5
|
||||
|
||||
Sounds good to me!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|