|
|
|||||||
| Projects Tell us about your cars mods, past, present and future! |
 |
|
|
Thread Tools |
|
#1
10-09-2016, 07:41 PM
|
||||
|
||||
Re-trimming door cards-newage
Already replaced interior to black spec c seats and been unable to source a set of matching door cards so thought would re-trim myself with a little help from the old man as all the trimmers i enquired wanted approx £200 to do this,so thought would have a go if ballsed it up would just take it to them.
so thought i would take a few pics(not the best quality of finished article) and do a quick guide in case it helps someone else out tools required Screwdriver knife dremel tin of Evo stick time-bond and finally some suede material Remove door card  Undo 3 screws on the back of door card  Then you need to either cut off the very top part of the plastic rivets or use a dremel to take the heads of which is much easier and saves cutting fingers to bits then when all removed it should pop off and the door card will split in two parts   Then clean up all the black bits of plastic left on the back of the doorcard  Remove the existing blue suede part  Then its just a case of cutting the new piece of material gluing both sides leaving to dry for a while then take your time and slide the top part into place first and then smooth the rest out,leave to dry and then make the holes through the new material. Then a case of putting the door card back together attach the three original screws and then i used small screws where all the plastic rivets was but if you had a glue gun or something im sure you could re-do them   Attach door card back on to door and then another 3 to do lol   All done for the price of about £25 and pretty pleased with the end result
__________________
(1988 wagon)-(2001- saloon with ppp)-(2001 p1)-(2003 wrx with ppp)-(2004 sti)-(1998 type r)-(54 sti)-(55 sti)-(2000 p1)-(55 sti)-(55 sti)-(2008 330s)-(2003 jdm sti) Last edited by bigemp; 10-09-2016 at 07:44 PM. 
|
|
#3
10-09-2016, 08:27 PM
|
||||
|
||||
|
Excellent work.
|
|
#4
10-09-2016, 09:20 PM
|
||||
|
||||
|
that does look good
|
|
#5
10-09-2016, 09:35 PM
|
||||
|
||||
|
Cracking results, looks very good and saved a load of money too! Nice little write up I am sure some brave souls will find useful in the future.
|
|
#7
11-09-2016, 07:57 AM
|
||||
|
||||
|
Looking good i will be doing similar thing on both our classics soon thanks for inspiration
Sent from my SM-G925F using Tapatalk
|
|
#9
11-09-2016, 11:19 AM
|
||||
|
||||
|
Nice work!
I had considered doing this myself a few years back when I swapped blue STI seats into my WRX, but took one off and wasn't sure if I'd balls up the plastic heat-melted rivets. Took the safe option and sourced some STI cards as well, but good to see it can be done 
|
|
#11
12-09-2016, 08:38 AM
|
||||
|
||||
|
as above - cracking work and nice result
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:  "Tinkered With!"  Maintained and Modified by Super Jules  & RM Performance http://www.rmperformance.co.uk
|
|
#12
12-09-2016, 05:02 PM
|
||||
|
||||
|
cheers guys if anyone decides to do there ones and wants some material deffo got enough for one set of door cards possibly even two lots. (dont want anything for it)
__________________
(1988 wagon)-(2001- saloon with ppp)-(2001 p1)-(2003 wrx with ppp)-(2004 sti)-(1998 type r)-(54 sti)-(55 sti)-(2000 p1)-(55 sti)-(55 sti)-(2008 330s)-(2003 jdm sti)
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
