South East Scoobies  

Go Back   South East Scoobies > The Garage > Engine Management
Reload this Page MOT fail/misfire
FAQ Calendar

Engine Management For all your mapping,diagnostics and electronics

Reply
 
Thread Tools
  #1  
Old 23-12-2014, 02:41 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default MOT fail/misfire
Ok where do I start?

Car has a misfire under load, I can't drive it any distance due to no MOT or tax.

Fuel is around a year old engine was rebuilt and reinstalled with 15w 40 semi synth oil (as per builders instructions). New plugs fitted as well.

Emissions are through the roof! Always passed after second test with the sports Cat in place.

Fast idle CO = 0.505, HC = 417, Lamda = 0.965
Natural Idle CO = 1.593

What do I check first? Syvecs ECU with Wideband.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #2  
Old 23-12-2014, 03:16 PM
scotty's Avatar
scotty scotty is offline
Platinum Member
  
Join Date: Aug 2012
Location: In ma bed
Posts: 5,807
Default
I would be dumping the old fuel as it will stagnant and putting clean fuel in it as you've not used it in a while
__________________
Maintained by Hypertech and Mapped by Andy Forrest

1998 UK Turbo , 1998 Terzo , 1997 JDM Type R the money pit , 2004 black WRX STI Type UK , 2004 blue FSTI
Reply With Quote
  #3  
Old 23-12-2014, 03:28 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
I'm thinking of a drop of octane booster/fuel cleaner in the old fiel and run it through before topping up with clean. Only pain is I can't drive it to the petrol station so lots of cans needed!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #4  
Old 23-12-2014, 03:40 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Either drain or several bottles of octane booster and then a fresh 20l on top

I've had similar misfire issues with other cars that have been sat for a year or more.
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #5  
Old 23-12-2014, 04:57 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default
As above dump the fuel , I'd also rebook a mot at frosts in Shoreham
__________________
Eat, Sleep, Race , Repeat
Reply With Quote
  #6  
Old 23-12-2014, 05:58 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
Hoping that I can get the misfire sorted soonish so I can get a retest for free. Only problem is I can't drive the car, otherwise it should be simple. I've also got to sort the brakes as they were a fail but only really due to lack of use.

Anybody with a Syvecs able to tell me what their wideband readings are at idle and 2500 rpm so I can see if my Lamda sensor is working?
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Last edited by SpecB; 23-12-2014 at 06:00 PM.
Reply With Quote
  #7  
Old 23-12-2014, 06:26 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,485
Default
Quote:
Originally Posted by BlueBugEye View Post
Hoping that I can get the misfire sorted soonish so I can get a retest for free. Only problem is I can't drive the car, otherwise it should be simple. I've also got to sort the brakes as they were a fail but only really due to lack of use.

Anybody with a Syvecs able to tell me what their wideband readings are at idle and 2500 rpm so I can see if my Lamda sensor is working?
Idle and 2500rpm should be 14.7AFR or ocscillating from around 14.3 to 14.9 if using 02 feedback.
If they are not then it will fail MOT.

If using a wideband it depends where the probe is and what exhaust is fitted.
If the probe is in the downpipe/header it should read fine. But if you have a dustbin of a tailpipe and the probe is only in the tip of the exhaust then the idle and light cruise readings are worthless.
Reply With Quote
  #8  
Old 23-12-2014, 07:25 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
I've calculated that a reading of 0.965 lambda is an AFR of 14.19 meaning the car is running rich. Is this likely with poor fuel? The Syvecs should be correcting the fueling based on the wideband sensor so it should be able to cope with old fuel?
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #9  
Old 23-12-2014, 11:36 PM
Domo2106's Avatar
Domo2106 Domo2106 is offline
Silver Member
  
Join Date: Jan 2014
Location: Brighton
Posts: 597
Default
Mine was miss firing when it came on boost while i was having it mapped it turned out to be a faulty plug id only fitted them the previous day stuck a new set of plugs in and it was fine
Reply With Quote
  #10  
Old 23-12-2014, 11:43 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,485
Default
If that AFR rock solid, as 14.19AFR is fine if it is the lower level of the oscillation.
Reply With Quote
  #11  
Old 24-12-2014, 07:25 AM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
I'll get out there again today and get the readings as AFR as I think I can switch the units. My wideband is in the downpipe so should be reading correctly.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #12  
Old 29-12-2014, 06:13 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
Haven't figured out how to change the units but have got some better fuel into the car and got the following readings at fast idle (2500) direct from the Syvecs Lambda fluctuating from 0.99-1.00 and at natural idle fluctuating slightly around 0.930.
The only error 'code' found was Engine coolant 1, low after warm up.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #13  
Old 29-12-2014, 06:42 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,485
Default
Dead coolant sensor will make it run a touch rich when warmed up.
Reply With Quote
  #14  
Old 29-12-2014, 07:19 PM
555_Si's Avatar
555_Si 555_Si is offline
Moderator
  
Join Date: Aug 2012
Location: Horsham
Posts: 2,238
Default
I am going to be putting my Miltek downpipe on soon, is it worth me/can I put a wideband in? Not sure what currently have without looking and will be going aftermarket ECU eventually most probably. Thought might be good for mapping if nothing else?

What make should I get? Where from?

thanks.
Reply With Quote
  #15  
Old 29-12-2014, 07:47 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
Cheers Scott, I'll have to get the sensor readings from cold to see if they make sense to double check but it sounds a good and reasonably cheap fix.

SI, I got mine from JT innovations with the correct Syvecs Lead, I don't think the STD ECU can use one though.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #16  
Old 29-12-2014, 09:25 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,485
Default
Quote:
Originally Posted by Wagon_Si View Post
I am going to be putting my Miltek downpipe on soon, is it worth me/can I put a wideband in? Not sure what currently have without looking and will be going aftermarket ECU eventually most probably. Thought might be good for mapping if nothing else?

What make should I get? Where from?

thanks.
Innovate LC-1 is a popular choice, although they seem to of now updated this to an LC-2 http://www.innovatemotorsports.com/products/MTS.php

Check out Ebay, normally a few bargains and I think some Innovate comes in from Latvia. My last sensor did and never had a problem with them myself.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 02:58 AM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.