South East Scoobies  

Go Back   South East Scoobies > The Showroom > Bling
Reload this Page Got this lot to fit..!
FAQ Calendar

Bling Show us your shiny bits!

Reply
 
Thread Tools
  #1  
Old 04-03-2014, 08:51 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default Got this lot to fit..!
This arrived in the post today, I've got two weeks to get it all strapped in and looking good before injectors and mapping etc.. I'm a bit nervous to start chopping stuff up!



__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #2  
Old 04-03-2014, 09:05 PM
ScoobyStu's Avatar
ScoobyStu ScoobyStu is offline
Gold Member
  
Join Date: Jun 2012
Location: Worthing
Posts: 1,527
Default
Nice mate. What power you hoping to make?
__________________
Smiles Per Gallon >>>>>>>> Miles Per Gallon
Reply With Quote
  #3  
Old 04-03-2014, 09:32 PM
Steve_PPP's Avatar
Steve_PPP Steve_PPP is offline
Admin, Meets/Events Organiser
  
Join Date: Sep 2008
Location: Burgess Hill, Sussex
Posts: 13,283
Default
Have fun!
Reply With Quote
  #4  
Old 04-03-2014, 09:41 PM
Red Baron's Avatar
Red Baron Red Baron is offline
Platinum Member
  
Join Date: Sep 2008
Location: St Leonards on Sea
Posts: 2,740
Default
Ooohhh, shiny. Are those pipes ceramic coated or just well packaged?
Reply With Quote
  #5  
Old 04-03-2014, 09:47 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
It's a bitch of a job! I particularly loved the way the pipe work had no instructions as to what goes where!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #6  
Old 04-03-2014, 09:55 PM
Granby's Avatar
Granby Granby is offline
Gold Member
  
Join Date: Sep 2008
Location: London
Posts: 2,333
Default
Well stop posting on here and get on with it
__________________
Not built for the Twisty's
Reply With Quote
  #7  
Old 04-03-2014, 10:32 PM
Hongkongfooi's Avatar
Hongkongfooi Hongkongfooi is offline
Platinum Member
  
Join Date: Dec 2008
Location: East Sussex
Posts: 5,783
Default
Good luck
Reply With Quote
  #8  
Old 04-03-2014, 10:40 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Cheers guys,.. anyone got an angle grinder?

Quote:
Originally Posted by ScoobyStu View Post
Nice mate. What power you hoping to make?
Hopefully somewhere near 400, should be around that I hope, manifold might restrict a tiny bit but don't have funds to change at the mo, I might remove and port/polish it .
Quote:
Originally Posted by Red Baron View Post
Ooohhh, shiny. Are those pipes ceramic coated or just well packaged?
Just well packaged
Quote:
Originally Posted by BlueBugEye View Post
It's a bitch of a job! I particularly loved the way the pipe work had no instructions as to what goes where!
Was going to ask you about that Nick as I think yours is the same? It looks abit of a PITA , noticed one pipe seems to reduce in diameter aswell :O not the same as the classic HDI kit I had on the last car at all.
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #9  
Old 04-03-2014, 10:52 PM
simba's Avatar
simba simba is offline
Silver Member
  
Join Date: Feb 2010
Location: horam
Posts: 1,451
Default
Good luck dave
__________________
1998 wrx wagon, RB5 , ..........
Reply With Quote
  #10  
Old 04-03-2014, 11:05 PM
BIG"E"'s Avatar
BIG"E" BIG"E" is offline
Events / Ring Trip Organiser
  
Join Date: Sep 2008
Location: Hastings
Posts: 8,913
Default
Quote:
Originally Posted by Ginola View Post
Cheers guys,.. anyone got an angle grinder? .

Yes thank you..

But you can not borrow it cos you will now kick my **** with all that power, well in a straight line..
__________________
Keep it on the black stuff and leave the pit boards alone
Last edited by BIG"E"; 04-03-2014 at 11:07 PM.
Reply With Quote
  #11  
Old 04-03-2014, 11:10 PM
BIG"E"'s Avatar
BIG"E" BIG"E" is offline
Events / Ring Trip Organiser
  
Join Date: Sep 2008
Location: Hastings
Posts: 8,913
Default
Does "The Handbrake" know about this??
__________________
Keep it on the black stuff and leave the pit boards alone
Reply With Quote
  #12  
Old 05-03-2014, 01:44 AM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Quote:
Originally Posted by BIG"E" View Post
Does "The Handbrake" know about this??
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #13  
Old 05-03-2014, 07:34 AM
Anger's Avatar
Anger Anger is offline
Platinum Member
  
Join Date: Oct 2008
Location: Bletchingley Surrey
Posts: 4,973
Default
I changed the pipe work as the one that goes underneath took a beating with speed bumps... Oh and it shortened the pipes
__________________
"We're here for a good time, not a long time...." Colin McRae MBE 1968-2007
Reply With Quote
  #14  
Old 05-03-2014, 07:38 AM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
As James said I'm not a fan of the under the car pipe, mine is fine but I have got an extra custom bracket holding it up to the subframe. One of the many plans I've got is to change the under pipe for an over, but I guess I'd better sort the HG first!

You're welcome to pop in on your way past for a look at mine anytime.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #15  
Old 05-03-2014, 07:52 AM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default
Their a piece of piss to fit and the pipes are easy to figure out .
Angle grinder you say , 4", 9"or 12" take your pick
Reply With Quote
  #16  
Old 05-03-2014, 09:17 AM
555_Si's Avatar
555_Si 555_Si is offline
Moderator
  
Join Date: Aug 2012
Location: Horsham
Posts: 2,238
Default
Got my japspeed to fit as well, wondering if to get hdi instead. Been advised to get silicon pipes and clamps uprated.
Last edited by 555_Si; 05-03-2014 at 09:20 AM.
Reply With Quote
  #17  
Old 05-03-2014, 10:25 AM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Quote:
Originally Posted by Wagon_Si View Post
Got my japspeed to fit as well, wondering if to get hdi instead. Been advised to get silicon pipes and clamps uprated.
I think the pipe run is better on the Japspeed, Molley I think had a pipe blow off on the way back from mapping, I think clamps and silicon is readily available though.
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #18  
Old 05-03-2014, 10:25 AM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Quote:
Originally Posted by BlueBugEye View Post
As James said I'm not a fan of the under the car pipe, mine is fine but I have got an extra custom bracket holding it up to the subframe. One of the many plans I've got is to change the under pipe for an over, but I guess I'd better sort the HG first!

You're welcome to pop in on your way past for a look at mine anytime.
Might well take you up on that!

Quote:
Originally Posted by C. J. View Post
Their a piece of piss to fit and the pipes are easy to figure out .
Angle grinder you say , 4", 9"or 12" take your pick
4" with a side of coffee?
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #19  
Old 05-03-2014, 10:27 AM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Quote:
Originally Posted by Anger View Post
I changed the pipe work as the one that goes underneath took a beating with speed bumps... Oh and it shortened the pipes
where did you get the replacement two pipes from dude? Or did you order a hole set?
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #20  
Old 05-03-2014, 11:02 AM
ScoobyStu's Avatar
ScoobyStu ScoobyStu is offline
Gold Member
  
Join Date: Jun 2012
Location: Worthing
Posts: 1,527
Default
Quote:
Originally Posted by Ginola View Post



Hopefully somewhere near 400, should be around that I hope, manifold might restrict a tiny bit but don't have funds to change at the mo, I might remove and port/polish it .
Nice one mate. Where did you get it from and what Turbo are you running?
__________________
Smiles Per Gallon >>>>>>>> Miles Per Gallon
Reply With Quote
  #21  
Old 05-03-2014, 02:19 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Quote:
Originally Posted by ScoobyStu View Post
Nice one mate. Where did you get it from and what Turbo are you running?
Aztec performance for the intercooler, - Harvey smith td05-20g
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #22  
Old 05-03-2014, 03:11 PM
ScoobyStu's Avatar
ScoobyStu ScoobyStu is offline
Gold Member
  
Join Date: Jun 2012
Location: Worthing
Posts: 1,527
Default
Quote:
Originally Posted by Ginola View Post
Aztec performance for the intercooler, - Harvey smith td05-20g
Cool! Sorry for the questions mate, just interested in the various routes people take

Look forward to seeing your results
__________________
Smiles Per Gallon >>>>>>>> Miles Per Gallon
Reply With Quote
  #23  
Old 05-03-2014, 04:41 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
  
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default
cool
Reply With Quote
  #24  
Old 05-03-2014, 10:22 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Quote:
Originally Posted by ScoobyStu View Post
Cool! Sorry for the questions mate, just interested in the various routes people take

Look forward to seeing your results
No worries theres a spec list here.. http://bbs.scoobynet.com/garage/2005...53-Ginola.html
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #25  
Old 05-03-2014, 10:47 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Biggles approves of the HDI box...
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #26  
Old 05-03-2014, 10:55 PM
scotty's Avatar
scotty scotty is offline
Platinum Member
  
Join Date: Aug 2012
Location: In ma bed
Posts: 5,807
Default
Yeap that's cats for you , open something and they have to investigate and I've got two of them double trouble for me lol .
Reply With Quote
  #27  
Old 06-03-2014, 07:56 AM
ScoobyStu's Avatar
ScoobyStu ScoobyStu is offline
Gold Member
  
Join Date: Jun 2012
Location: Worthing
Posts: 1,527
Default
Nice spec that!
__________________
Smiles Per Gallon >>>>>>>> Miles Per Gallon
Reply With Quote
  #28  
Old 06-03-2014, 09:31 AM
Bolesroor's Avatar
Bolesroor Bolesroor is offline
Platinum Member
  
Join Date: May 2010
Location: Kent
Posts: 3,170
Default
Dave I thought you had had the cats removed.......
Reply With Quote
  #29  
Old 06-03-2014, 09:58 AM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
  
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,062
Default
Quote:
Originally Posted by Bolesroor View Post
Dave I thought you had had the cats removed.......
I just spat my coffee out, that was funny
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S
Reply With Quote
  #30  
Old 06-03-2014, 01:53 PM
thepieman's Avatar
thepieman thepieman is offline
Platinum Member
  
Join Date: May 2011
Location: home
Posts: 1,984
Default
Reply With Quote
  #31  
Old 06-03-2014, 03:53 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Haha!
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #32  
Old 06-03-2014, 11:29 PM
scotty's Avatar
scotty scotty is offline
Platinum Member
  
Join Date: Aug 2012
Location: In ma bed
Posts: 5,807
Default
Been on Aztec website really good prices looks like that's where I will be getting my FMIC and some other parts from .
Reply With Quote
  #33  
Old 25-03-2014, 04:21 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
  
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default
SHINY PARTS !!!! Awesome !!!! Cant wait to see the results !
Reply With Quote
  #34  
Old 25-03-2014, 04:35 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
  
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default
Quote:
Originally Posted by Rdlangy1 View Post
SHINY PARTS !!!! Awesome !!!! Cant wait to see the results !
fitted here:-

http://www.southeastscoobies.co.uk/v...ad.php?t=17668
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #35  
Old 01-04-2014, 02:18 PM
EXEVO3's Avatar
EXEVO3 EXEVO3 is offline
Silver Member
  
Join Date: Sep 2013
Location: Kent SITTINGBOURNE
Posts: 554
Default
devo need to decat!!
__________________
V2 WRX
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 07:00 AM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.