South East Scoobies  

Go Back   South East Scoobies > The Garage > Wheels,Tyres & Brakes

Reply
 
Thread Tools
  #1  
Old 01-11-2011, 06:52 PM
wonkey85 wonkey85 is offline
Bronze Member
 
Join Date: Jul 2011
Posts: 322
Default Two piece disk and Kevlar pads ?

Whats peoples views on these anyone ever herd of them
??
Godspeedbrakes.co.uk

THE MOST POWERFUL BRAKES USING THE STANDARD SUBARU 4 POT CALIPERS.
*
Here is a kit we designed many years ago to fit under 17" wheels retaining the original Subaru 4 pot calipers , the calipers are a good design with good sized pistons , for the ultimate driving and track days the discs are not big enough , the standard discs are 294mm x 24mm thick , the discs in this conversion are 335mm x 32mm thick , being thicker they can take a lot more heat , and the larger diameter offer the calipers a lot more leverage , so braking power is hugely increased.
Our discs have a separate anodised alloy bell , so will dissipated heat a lot quicker than a one piece disc , and as they are a 2 piece design , when they wear down you only need to change the outer rotor as you re-use the alloy bells over and over , replacement discs come out at £295 a pair including a set of 20 nuts and bolts.
Our kit also uses a larger than standard pad , we use an Aston Martin pad which we modify slightly to fit , the pads are the same length as a standard pad so still slides into the calipers , but are about 15mm wider , our pad area on our discs are also wider than the standard Subaru discs to accommodate the pads.
All makes of pads and compounds are available in this shape pad , we usually supply either Ferodo DS2500 or NDX bluestuff pads with the kit.
The kit also comes with a mounting bracket kit which includes the brackets to fit to the upright , which brings the calipers out to allow the fitment of the larger discs , and a caliper spacer kit which widen the calipers to fit the thicker discs.
*
All in all the best brakes available retaining the original Subaru 4 pot calipers
*
*
Replacement discs inc 20 nuts and bolts are £295
*
Reply With Quote
  #2  
Old 01-11-2011, 08:20 PM
Steve_PPP's Avatar
Steve_PPP Steve_PPP is offline
Admin, Meets/Events Organiser
 
Join Date: Sep 2008
Location: Burgess Hill, Sussex
Posts: 13,283
Default

I know a couple of people with the Godspeed kit for 4 pots, seems to work reasonably well. Basically you have to split the caliper and put a spacer in between so that it takes the thicker discs.

Personally, i'd spend the money on a set of Brembo's..... Only issue is they won't go under the standard wrx alloys - depends if you plan on changing them too!
Reply With Quote
  #3  
Old 01-11-2011, 08:49 PM
wonkey85 wonkey85 is offline
Bronze Member
 
Join Date: Jul 2011
Posts: 322
Default

It's all about price. How much would a Brembo kit cost and where to get it from. The wife's getting the scoob at the end of next year and I'll be getting a newer one so don't want to spend thousands.
Reply With Quote
  #4  
Old 01-11-2011, 09:04 PM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

personally found that whilst the kit is pretty reasonable performance wise, we often find the larger pads wear in a "cheese" wedge" style due to the large unsupported area............

for extreme use then i normally use std sized pads

out of interest i have a Brembo GT kit, brand new that could be around £1000 and clears WRX wheels comfortably (not to be confused with a lesser spec STi Brembo)
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #5  
Old 01-11-2011, 09:26 PM
scooberblue's Avatar
scooberblue scooberblue is offline
Bronze Member
 
Join Date: Sep 2008
Location: Hastings
Posts: 388
Default

personly if you can get a godspeed kit second hand then yes definatly go for it.
i personly wouldnt get one new as the standard subaru 4pot calipers are prone to siezed /
corroded pistons so if you were going to get the godspeed kit (£5-600 new) you would be best of getting the calipers refurbed with stainless pistons (but thats around £300)

so before you no it £900 gone. yeah its a cracking setup but think what brake kit you could buy for around £1000
__________________
Greener is meaner
Reply With Quote
  #6  
Old 09-04-2012, 02:23 PM
Iceman_II Iceman_II is offline
Regular User
 
Join Date: Mar 2011
Location: Crawley Down
Posts: 30
Default

I've installed Godspeed pads and disks on my STI v2 Classic and very happy with them. I only use the car for general driving... no track days!
Reply With Quote
  #7  
Old 18-04-2012, 08:35 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
 
Join Date: Mar 2011
Location: Steyning
Posts: 4,233
Default

How hard do you drive your car at the moment wonkey?
I had godspeed grooved disks and kevlar pads and later on blue stuff on the same disks with the same 4 pot calipers on a classic STI wagon, (spirited driving, not track), running a little over 330bhp.

The kevlar pads where dreadful and I would not buy ever again. The bluestuff where decent and you had to push very hard to make them fade.

As others have stated the best bet is a secound hand set of brembo's but if the wife is getting the car next year I would be very tempted to get a set of normal groved disks and some decent pads ds2500's /performance friction or even the bluestuff....Then again how hard does your wife drive?
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 12:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.