#1
|
|||
|
|||
2port catch can
how do you plumb in a 2port catch can on a classic
|
#2
|
|||
|
|||
you cant (not and it function correctly)
2ports is not enough.. as you need a vent............... need a nice big port for crank (15mm pipe at least).. needs then two for each cam breather or one Tee'd... then a vent.. Simon
__________________
Jolly Green Monster Limited Full time mapper and Ecu Expert - EcuTek 99 to 2010, ESL 93 to 96, Apexi, Motec, Autronic, Link, GEMs, Simtek, Solaris/Syvecs remaps www.JollyGreenMonster.co.uk Please follow of Facebook http://www.facebook.com/pages/Jolly-...26125404073166 |
#3
|
|||
|
|||
So your saying throw it in the nearest bin and get a 3 port.
How do others get away fitting 2 ports then? as i have known others to fit a 2port |
#4
|
|||
|
|||
Numerous turn up for mapping wrongly piped.
Do you have a link to which in it is? It is possible to weld bosses to it and make it work
__________________
Jolly Green Monster Limited Full time mapper and Ecu Expert - EcuTek 99 to 2010, ESL 93 to 96, Apexi, Motec, Autronic, Link, GEMs, Simtek, Solaris/Syvecs remaps www.JollyGreenMonster.co.uk Please follow of Facebook http://www.facebook.com/pages/Jolly-...26125404073166 |
#5
|
||||
|
||||
A two port will fit however it won't really be effective and may actually cause issues as it will restrict the engine breathing.
As Simon Says, Fit a 3 port minimum port 1 for the Crank case (15mm) and port 2 for the heads (tee'd together) port 3 return to inlet (ideally vta). Personally I'd go 4 a 4 port so the heads aren't tee'd and the final port vta's best I've seen is the one on Simbas car as supplied by Brent at SMD which has 3 inlet ports and a huge VTA port/filter so no restrictions on breathing.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#6
|
|||
|
|||
http://bbs.scoobynet.com/trader-anno...tch-tanks.html
one of these i believe. although i never bought it from there |
#7
|
|||
|
|||
so there no way of doing it
|
#8
|
||||
|
||||
You could buy a second one, have one for the heads with the two pipes Tee'd together and run a second one for the crankcase. Both VTA
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|