#1
|
||||
|
||||
Apexi Induction - Save yourself £100 (MY97-00)
Always one to look at saving a few pennies with DIY mods.
So, done a bit of research a while ago into the Apexi Induction Kit. I had seen good results on the cars I had mapped, so thought it about time I tried one myself. I didn't fancy paying £150 for one of these, suitable for Impreza 1997-2000 : When for £45 you can get one of these : Apexi Power Intake Replacement Filter £3.49 for 1M or steel from B&Q a bit of bashing and save yourself £100. Bracket to stop MAF vibration Mounted to Alarm Bracket All Painted |
#2
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
cant believe its that much more just for the bracket
|
#3
|
||||
|
||||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Sweeeeeet..... Damn your engine bay is looking very bling/clean these days.
Better stop mucking/maxing out those 440's now though, bite the bullet and get some 550's in there. Always willing to help if you need it. I'm an expert at filling up my bores with petrol now. |
#4
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Scott
Where did you get your silicon induction hose? I am after a few hoses, samco so damn expensive |
#5
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Looks like he has used sfs performance hose
|
#6
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
You must have to much time to play around Scott....looking nice though
|
#7
|
||||
|
||||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Quote:
Best/cheapest place for samco is http://www.rallydesign.co.uk in faversham. |
#8
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Thanks guys
|
#9
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
burton power do a good line in silicon hoses very reasonable ilford essex
|
#10
|
||||
|
||||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Update.... bracket has made way for the start of a sealed Cold Air Kit, knock up out of £4.00 of Ally sheet and a cornflake packet template :
|
#11
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Did look at that yesterday, very nice job sir
|
#12
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
If i was ever to buy a clasic scoob it would be Scott's . It's by far the best looking clasic out there, well done mate & it's in the best colour. {everyone know's the silver one's are the fastest}
|
#13
|
||||
|
||||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Cheers for comments guy's
Well today used a bit of the spare ally and spent 1/2 hour doing a bit of ally bashing'n'bending. Realised I must have a bit of Blacksmith in me..... Ended up with a lid for the Cold Air Box...a bit rough at mo' and still has protective plastic on it. But I figure a trim, grind, sand and polish and it should be just the job. Might have to call on Wayne555 and use his expert polishing skill. Has anyone got his contact detailed as I have only ever PM'd him on Sussex....and seem to of lost his mobile number..... |
#14
|
||||
|
||||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Progress......
This will give you the idea of what it'll look like : |
#15
|
|||
|
|||
Re: Apexi Induction - Save yourself £100 (MY97-00)
Nice one Scott looks nice. Now paint that bloomin header tank
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|