Shims
Does anyone know where i can get shims from, i like to think i have measured them up correctly, just need to get all the inlet ones as the exhaust ones seem to be fine...
The sizes i need are,
Left Inlet
1 = 2.95mm
2 = 2.51mm
3 = 2.54mm
4 = 2.58mm
Right Inlet
1 = 2.83mm
2 = 2.79mm
3 = 3.00mm
4 = 2.92mm
Am i right in saying that the gaps for the inlets should be 0.20mm and the exhaust should be 0.25mm.
Failing that does anyone know anybody that can do this at a reasonable price, as i am not even 100% sure i have done it correctly. The heads are all off and cam caps are loose.
|