[Domo2106]

Hi all ive recently fitted a new clutch to my 03 wrx as when i got it the biting point was high i fitted a excedy kit from as Preformance but the biting point is still very high id say about 3 1/4 of the way up its not slipping at all just very high i also noticed the friction plate in the original clutch i removed had very little if any wear to it ive adjusted the pedal bit it has made no difference any ideas on what would cause this im thinking mabey the flywheel has been skimmed too much or the clutch arm is bent i was just after a second opinion before i take the gearbox off again anyone ever had this problem before ?