Quote:
Originally Posted by SilverSurfer
Yes but you will need a Lambda Boss welding into the bottom of the DP for the 2nd Lambda probe and a bung for the top boss.
I may have a boss/bung kicking about, and Steve Cole does a good job for a case of Becks 
You can re-route the cable but it's a bit of a PITA as it's well loomed up. The probe will also last longer the further it is from the heat source. |
Cool - I have a downpipe and a resonated decat centre, and TSL rear box. So boss/bung and a little welding has to be the most cost effective way of getting a full decat on mine.. If you have boss/bung would be great, if not if you could PM us where I might get one. cheers