Quote:
Originally Posted by RobEvo5
Following on from the same question:
The answer is probably in the above somewhere, but my question is will a classic decat downpipe and centre section fit straight onto a 2.5 Hawk?, and be able to use hangers.?.
|
Yes but you will need a Lambda Boss welding into the bottom of the DP for the 2nd Lambda probe and a bung for the top boss.
I may have a boss/bung kicking about, and Steve Cole does a good job for a case of Becks
You can re-route the cable but it's a bit of a PITA as it's well loomed up. The probe will also last longer the further it is from the heat source.