Newage 2.0 DP section is shorter then classic on an OE pipe as the Newage DP ends just passed the bend. It then has another section Front pipe/cat that then joins the centre section.
This gives an overall length DP & FP that is slightly longer then the Classic DP
Due to this the Newage Centre Section is slightly shorter then the Classic Centre.
To confuse things more the 2.5 DP section is slightly shorter then the 2.0 DP (it finishes on the bottom bend rather then passed the bend) , but the 2.5 and 2.0 Newage are the same length when combined with their respective FP/Cat,therefore able to use the same centre section.
With regard to your pipe, it depends if it is the DP or a single pipe to replace the DP and FP. As an example the MillTek Newage Decat DP replaces both DP and FP, but the ScoobyWorld Afterburner Vortex replaces just the DP. They then sell a seperate FP/Cat replacement pipe.
If your DP has a Lambda boss in the lower horizontal section it sounds like it is a combined DP & FP. If that is the case. To marry this up to a Classic rear box you will need a Newage Centre pipe.
With regard to Lambda, you may need to get a new boss welded in to the top of the DP for your Classic Lambda fitment and a bung for the lower position on the Newage pipe.
|