Hi.
A couple of questions , do they rub both sides.
Do the wheels look to sit the same both sides.
Did you have the geo done properly.
As Pieman has said, I did have a rubbing issue after fitting my BC's
To cut a long story short, one company were ****e, so I took it to JRM who corrected it and it's the nuts now.
Problem was the strut camber bolt needed loosening and the strut moving, then the geo settings sorted for camber, Toe etc.
My advice is , take it to JRM , 80 quid per hour, but worth every penny.
I just happen to have a brand new set of front and rear camber bolts if you need them. Cheap too