[midlife2]

Thanks CJ i will tell him . Here are the instructions from the makers of the gauge

here are the instructions

wiring for ALL SAGA gauges :

RED - Battery +

BLACK - Ground

BROWN - connect into sidelights or dimmer switch, this is to lower the gauge illumination at night

ORANGE & YELLOW - On the ignition switch there are normally 4 key positions as follows :

Position 1 - OFF

Position 2 - ACC connect YELLOW wire to this

Position 3 - ON here there are 2 wires, 1 will have no power when the engine is started

1 will retain power when the engine is started - connect ORANGE to this

Position 4 - START ENGINE