South East Scoobies

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)
-   General Car / Scooby Chat (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=17)
-   -   turbo upgrade (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=8374)

sumo-scooby 21-05-2011 11:17 PM

turbo upgrade
 
Hi does anyone know if a TD05 20G turbo will fit a v5 classic running a TD04.at the moment

jura11 21-05-2011 11:44 PM

Quote:

Originally Posted by sumo-scooby (Post 88210)
Hi does anyone know if a TD05 20G turbo will fit a v5 classic running a TD04.at the moment

Yes will fit.

But you will need lots of supported mods and not sure if its your engine will take without the forging engine.



Jura

sumo-scooby 21-05-2011 11:55 PM

Hi sorry ment the td05 16g turbo, im running cp forged pistons and sti9 rods with cosworth bearings/gaskets would that be strong enough?

jura11 22-05-2011 12:09 AM

Quote:

Originally Posted by sumo-scooby (Post 88217)
Hi sorry ment the td05 16g turbo, im running cp forged pistons and sti9 rods with cosworth bearings/gaskets would that be strong enough?

More than enough mate:10:


16G will be good upgrade,but 330bhp is top from this turbo.If you find good one,but beware before eBay garbage.

VF30,VF34 or VF35 will be great turbo too..

Jura

Moley_WRX 22-05-2011 11:53 AM

16g will be fine, but you'll need to find a front entry one, not top entry

sumo-scooby 22-05-2011 12:33 PM

Found front entry ones at scoobyworld.co.uk which is a genuine mitsibish one, can get them on ebay for third of price but prob have nothing but trouble from those so might aswell spend that little bit extra.
Looking to run around 1.6bar

jura11 22-05-2011 01:45 PM

Quote:

Originally Posted by sumo-scooby (Post 88253)
Found front entry ones at scoobyworld.co.uk which is a genuine mitsibish one, can get them on ebay for third of price but prob have nothing but trouble from those so might aswell spend that little bit extra.
Looking to run around 1.6bar

I would suggest buy used VF34(for £380 ScoobySpares have one http://bbs.scoobynet.com/car-parts-f...l#post10052062 ),great turbo and will make more than 16G(340-360bhp),on mine WRX has made 350bhp



Jura

sumo-scooby 22-05-2011 03:36 PM

Will the vf34 fit my 1999 uk turbo 2000? Wasnt sure if got a differant flange setup

jura11 22-05-2011 03:40 PM

Quote:

Originally Posted by sumo-scooby (Post 88270)
Will the vf34 fit my 1999 uk turbo 2000? Wasnt sure if got a differant flange setup


Yes is straight fit,matey.Have same flange setup as TD range

Just VF36/37 have different flange,because its Twin scroll.



Jura

sumo-scooby 22-05-2011 03:56 PM

Ok cool, will i have to change the injectors as running standard 440's

jura11 22-05-2011 03:59 PM

Quote:

Originally Posted by sumo-scooby (Post 88272)
Ok cool, will i have to change the injectors as running standard 440's

I would advise to you change at least 550cc,440's will run of power somewhere at 320-330bhp(mine was run of power at 320bhp)

You are running FMIC or TMIC?


Jura

sumo-scooby 22-05-2011 04:15 PM

Got a fmic going to be redoing the fuel system soon with new billit rails ect

jura11 22-05-2011 04:18 PM

Quote:

Originally Posted by sumo-scooby (Post 88275)
Got a fmic going to be redoing the fuel system soon with new billit rails ect

That's will be very nice and wise matey:10:



Jura

jura11 22-05-2011 04:28 PM

Quote:

Originally Posted by sumo-scooby (Post 88275)
Got a fmic going to be redoing the fuel system soon with new billit rails ect

Hi matey have look at this,maybe something for you will find there

http://bbs.22b.com/cgi-bin/ultimateb...;f=34;t=003102



Jura

scooby doo 22-05-2011 05:42 PM

a 16g and 440s will run 350-360bhp but thats top end of them both.
it all depends what you want from it.
if power is what you want then you should be lookng at 20g 550s along with reg and walbro and good ecu and your over the 400bhp mark,

But if your after a good road car then just mapp a 16g on your set up and you have a very nice 320-340bhp car.

chrisp 22-05-2011 08:44 PM

20g is a good turbo, plenty of people have used them including myself to over 400bhp. Just make sire you get a good one, plenty of cheap copies from china floating about


All times are GMT +1. The time now is 02:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.