South East Scoobies

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)
-   General Car / Scooby Chat (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=17)
-   -   2006 rear diffuser help needed (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=7879)

Hongkongfooi 10-04-2011 08:27 PM

2006 rear diffuser help needed
 
Those with the rear diffuser fitted can you take a pic or advise what bracket I need to fit mine.....its the one that goes near the diff end thats missing...even gatwick subaru can't see it on this diagram!
http://i393.photobucket.com/albums/p...mentaspx-4.jpg

Brent has looked for me but all he has found is a cusco one?

I have all the bits in this pic already

Anger 10-04-2011 08:34 PM

Mine is fitted to a Cusco brace and came straight off a hawkeye

Hongkongfooi 10-04-2011 08:36 PM

Can't understand why subaru don't show/stock it though?:sadnod:

Scott.T 10-04-2011 08:39 PM

Just get a bit of angle from B&Q and drill to suite.

Anger 10-04-2011 09:04 PM

Quote:

Originally Posted by Hongkongfooi (Post 82928)
Can't understand why subaru don't show/stock it though?:sadnod:

I can take a pic tomorrow for you, a bit dark now ;)

Anger 10-04-2011 09:09 PM

http://intakeone.com/Subaru_intake/C...arDiffuser.htm


This link has a pic of the Cusco part :)

jura11 10-04-2011 09:17 PM

Hi there here is it what you probably need

Cusco Diffuser Bracket Subaru
http://www.rallysportdirect.com/cata...487_s_1_lg.jpg

Cusco Rear Lower Subframe Bar Subaru

http://www.rallysportdirect.com/cata...487_a_1_lg.jpg

In USA this cost around $300 in total with diffuser
http://www.rallysportdirect.com/STI-...-STI-2002-2007

http://www.rallysportdirect.com/cata...ubaru+diffuser

Jura

Hongkongfooi 10-04-2011 09:22 PM

thanks chaps...just what this forum is all about...helping.

Don't need the cusco brace so i'm thinking one of those brackets will do or make something up myself?

Nige 11-04-2011 10:56 AM

I thought i would be of help & save you some penny's . Dont fit it your cars not fast enough!
See easy, now say thank you Nige :lol:

worzel 11-04-2011 11:17 AM

Quote:

Originally Posted by Nige (Post 82972)
I thought i would be of help & save you some penny's . Dont fit it your cars not fast enough!
See easy, now say thank you Nige :lol:

You are a bugger and a half you are! :lol:

ralliart didz 11-04-2011 07:04 PM

Quote:

Originally Posted by Nige (Post 82972)
I thought i would be of help & save you some penny's . Dont fit it your cars not fast enough!
See easy, now say thank you Nige :lol:

does that mean its not worth putting my one on then nige :mrgreen: i thought it would keep up with yours then :mrgreen:

tbtstt 12-04-2011 09:15 AM

I could be completely wrong, but as I understood it the hawkeye already has the bracket there for the rear diffuser doesn't it (i.e. as part of the chassis), hence why it doesn't show a bracket on the IPC?

You need the Cusco brace and bracket to fit the rear diffuser to a blobeye, or you can fit it by drilling straight into the boot floor and making up some form of bracket?

I looked into it a few months ago for my blob and found a few complete kits (Cusco brace, bracket and the diffuser itself) from Japan. Obviously you'd end up with two diffusers that way though!

darth maul 12-04-2011 04:03 PM

give mark at bell and covill a ring the bracket is £35 as i need the same thing 01483281000 ask for him in parts

Hongkongfooi 12-04-2011 04:04 PM

Quote:

Originally Posted by darth maul (Post 83113)
give mark at bell and covill a ring the bracket is £35 as i need the same thing 01483281000 ask for him in parts

great stuff...will do


All times are GMT +1. The time now is 12:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.