How easy ?
 

How easy is it to take door cards of to change speakers , as where are screws clips etc ,,,:-|

piece of cake,
Unclip the surround around the door handle,Don't undo the screw in the door handle recess.
Remove the electic window switch and locate the screw/bolt inside,
Thats it i think, Start at the bottom right corner and slowly unpop,
The card itself also clips inside of the window groove,
Seriously sounds alot harder than it is, just take your time, it should all pop off nicely, as for changing the speakers you may need to buy a adapter kit from sumwhere if you fancy upgrading size etc
Refitting is simple, align from the top first,making sure it slots into the window groove then slowly push it back on and finaly do up bolts/screws.
Any probs give me a shot n i can pop over n show you if needed

Cheers Nick , will give u a shout if i get stuck :ok:

Do your's first Chris and then I'll do mine( drivers door speaker is bust) when you say nick's pointers are good :mrgreen:

Will ave a look tomoz or friday

Easy, unclip surround , undo screw in door handle, pop off , unclip electric window switches plastic connector , hey presto unscrew speakers , new sony's 130 watt front , fusion 240 watt rears boom.boom .boom... :mrgreen:

agree easy :ok: now need to get replacements. Nick/Chris thanks.

see told you :P
Glad it all wetn well, must replace my fronts soon, wht size did you put in chris? did you have to buy adapters?

Nick I have managed to get a pair of Alpine 13cm units, fitted using 2 screws at present, using original mounts, will get the Autolead adaptors off fleabay as they are cheaper there than halfrauds. Part no 2840

13 cm diamater , fits in original bracket using 2 fixing points , cut old speakers off, fit new male/female spade crimp things just plug on and screw back in :ok: