South East Scoobies - inlet torque

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)

- General Mechanics (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=41)

- - inlet torque (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=419)

C. J.

11-11-2008 12:48 PM

inlet torque

Any one know the torque settings for the bolts on a newage wrx inlet manifold ?

Scott.T

11-11-2008 01:28 PM

Re: inlet torque

About Grrrrrr....that tight, using a standard length ratchet.
thats how tight I did mine after re-fitting with new gaskets.

DukeBoy

11-11-2008 06:56 PM

Re: inlet torque

25nm 18.1lb/ft

C. J.

11-11-2008 08:39 PM

Re: inlet torque

cheers :chug:

2-jaffacake-tone

11-11-2008 09:16 PM

Re: inlet torque

tight enought that they dont undo. but not too tight that you pull the thread out the block :lol:

All times are GMT +1. The time now is 09:03 PM.