Power run
 

Well got the car booked on the dyno at Hypertech on thursday at 2pm be interesting to see what she is sitting at .

is she all mapped and running ok? think andy F mapped it didn't he? what turbo you running at the moment?

All mapped by Andy F still on a vf23 running spot on just interested to see the graph of the power curve if there is any with my driving lol .

For a bit of fun Scott can you hazard a guess? Out of the blue I will say 310...

Not to sure but i will go with 315

314hp / 310lb/ft. My guesstimate good luck! Let us know ;)

Weather is **** car is going on the dyno mingin thats a first for me my drills are slacking oh im so looking forward to the bang at the end :lol:

So lets have a guess but 1st what mods Scott
Fmic ,
Rcm filter
pump?
Fpr?
Full 3 in decats
and remapped to what boost on a vf23?

Fmic
440
RCM filter
Standard fpr
Full 3in decat
Vf23
Walbro fuel pump
Pushing a safe 1.3 bar of boost

321Bhp.

305bhp and bang:lol:

When you say bang do we presume at best that means bang from the exhaust?

Let the fun begin 😊😊😊😊
http://uploads.tapatalk-cdn.com/2016...fcd3349cbe.jpg
http://uploads.tapatalk-cdn.com/2016...5d784bd9ec.jpg

Sent from my SM-G920F using Tapatalk

Oh well boost issue stop play car getting booked in to find out what the problem is .

Ended at 285/285
At 1.2bar

That's a bummer ,any ideas why? Actuator? Leak? Or your 2 port?

We are going to start with a smoke test to see if there are any leaks and go from there .

Well on a good note had a good look at this little beauty 😊😊😊😊
http://uploads.tapatalk-cdn.com/2016...23dcf5c754.jpg

Sent from my SM-G920F using Tapatalk

https://youtu.be/Gk2FxKemCXw

Sent from my SM-G920F using Tapatalk

what do you expect when you allow the 'hob goblins' to "tune" your car..............:-P

:lol:

That is a beauty. :ok:

Well done smoke test on car today found out the fmic core is fubard so new fmic it is then a remap

Atleast you have found an issue :ok:

Least known fault , was it stone damage?

Dont know could be anything tbh .

Well least it's not terminal fault and easy enough to source and replace

Picking up core off a friend for free might aswell buy a brand new 2 port boost solenoid to be safe :smile: