South East Scoobies

South East Scoobies (http://www.southeastscoobies.co.uk/vbulletinforum/index.php)
-   General Mechanics (http://www.southeastscoobies.co.uk/vbulletinforum/forumdisplay.php?f=41)
-   -   Bugeye Prodrive Lense Replacement (http://www.southeastscoobies.co.uk/vbulletinforum/showthread.php?t=14989)

Mortster 10-03-2013 08:51 PM

Bugeye Prodrive Lense Replacement
 
I know not many have these, but after almost 2 years of searching. Non replies from Subaru, Prodrive and Hella. I've discovered a simple replacement that is actually the same unit.

On most, I'd say about 90%, the outside lenses crack on both sides. Hella no longer list the part number, saying it has long been deleted. Subaru, if they can find it on the system want £170 odd for each lamp. Ouch.

After some searching, and snapping up units that looked the same from ebay, I discovered the unit is still made, exactly the same, with a different Part Number, but the unit itself is made up of two bits, with the same OLD part numbers, and you can get them for £35.00 + vat from a company in Guildford.

The old broken unit vs the new one.

http://www.mortster.net/images/Hella/Hella90%20(1).jpg
The part number for the broken lense half 152 927 00
http://www.mortster.net/images/Hella/Hella90%20(3).jpg

The new one, same lense half part number

http://www.mortster.net/images/Hella/Hella90%20(2).jpg

The lamp half old one 152 926 00

http://www.mortster.net/images/Hella/Hella90%20(4).jpg

The shiny new one, again same part number

http://www.mortster.net/images/Hella/Hella90%20(5).jpg

The actual part number for the new unit, there is no left or right version, as you just twist the body depending on what side you're fitting it.

http://www.mortster.net/images/Hella/Hella90%20(6).jpg

Now heres the sneaky bit, this is why Subaru charge so much for them, to make sure they fit alongside the headlamp adjuster motor, they snap one of the mounting lugs off!!

http://www.mortster.net/images/Hella/Hella90%20(7).jpg

All you have to do with the new unit, is the same.

http://www.mortster.net/images/Hella/Hella90%20(8).jpg

One installed, brand new unit.

http://www.mortster.net/images/Hella...130116_011.jpg

So the part number you need to replace your broken dipped units is

1LL 008 193-11

http://www.autoelectricalpartsuk.co....008193117.html

Steve_PPP 10-03-2013 10:33 PM

Nice work, really useful post :doubleup:

Mr Windscreen 11-03-2013 09:41 PM

I managed to get a second hand one for mine but at least there still available if i need another one


All times are GMT +1. The time now is 07:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.